Testo 882 , 33 Hz thermography camera, -20 to +350 °C, 320 x 240 pix bolometer matrix 0560 0882 User Manual

2 Safety and the environment 

 

 

5 

 

 

Control keys of the instrument or buttons of the 
program interface.  

 

 

... | ... 

Functions/paths within a menu. 

 

 

“...” Example 

entries 

 

 

 

>  Only operate the product properly, for its intended purpose and 

within the parameters specified in the technical data. Do not 
use any force. 

 

>  Do not operate the instrument if there are signs of damage at 

the housing, mains unit or feed lines.  

 

The thermal imager must not be directed at the sun or other 
sources of intense radiation (e.g. objects with temperatures greater 
than 500 °C, 800 °C while using the high-temperature filter) during 
operation. This may lead to serious damage to the detector. The 
manufacturer accepts no warranty for this type of damage to the 
microbolometer detector. 

 

>  The objects to be measured or the measurement environment 

may also pose risks: Note the safety regulations valid in your 
area when performing the measurements. 

 

>  Do not store the product together with solvents. Do not use any 

desiccants. 

 

>  Carry out only the maintenance and repair work on this 

instrument that is described in the documentation. Follow the 
prescribed steps exactly. Use only original spare parts from 
Testo.  

 

>  Improper use of rechargeable batteries can lead to destruction 

or injuries by means of current surges, fire or escaping 
chemicals. The following instructions must be observed to avoid 
such hazards: 
•  Only use in accordance with the directions in the instruction 

manual. 

•  Do not short, take apart or modify. 
•  Do not expose to heavy impacts, water, fire or temperatures 

above 60 °C. 

•  Do not store in the proximity of metal objects. 
•  Do not use leaky or damaged rechargeable batteries. In the 

event of contact with battery acid: Thoroughly wash affected 
area with water and consult a doctor, if necessary.