Hanna Instruments HI 98304S Conductivity tester DIST 4 HI 98304S Data Sheet

Product codes

HI 98304S

OPERATION:

• Remove the protective cap.

• Turn the DiST

DiST

DiST on.

• Immerse it in the solution to be tested without

exceeding the maximum immersion level.

• Stir gently and wait for the reading

to stabilize.
DiST

DiST

DiST automatically compensates for
temperature variations.

• The reading on display is directly expressed in:

ppm (mg/L) unit for DiST1

DiST1

DiST1 (

HI98300

HI98300 & HI98301

HI98301

ppt (g/L) unit for DiST2

DiST2

DiST2 (HI98302

HI98302

HI98302),

µS/cm for DiST3

DiST3

DiST3 (HI98303

HI98303

HI98303) and

mS/cm for DiST4

DiST4

DiST4 (HI98304

HI98304

HI98304).

CALIBRATION:

• Immerse the DiST

DiST

DiST in the indicated calibration

solution (see Specifications), without exceeding
the maximum immersion level.

• Allow the reading to stabilize and with a small

screwdriver turn the calibration trimmer until the
display shows the required solution value.

E.g. for calibrating HI98301

HI98301

HI98301 the correct calibra-

tion solution is HI70032

HI70032

HI70032, and the trimmer should

be turned until the display shows "

1382

BEPS AND BATTERY REPLACEMENT:

DiST

DiST is supplied with BEPS (Battery Error Preventing
System) which avoids any erroneous reading due to
low batteries level, by switching the meter off.
To replace the batteries, slide off the battery com-
partment cover and replace all four 1.5V batteries
while paying attention to their polarity.

Batteries should only be replaced in a nonhazardous
area using the battery type specified in this instruction
sheet.

DiST

HI98300/1/2/3/4

Conductivity/TDS Meters

with Automatic Temperature
Compensation

Manufacturers since 1978

Visit our Internet Home Page:

http://www.hannainst.com

ACCESSORIES:

HI 70030P

12880 µS/cm calibration kit
(25 x 20 mL sachets)

HI 70031P

1413 µS/cm calibration kit
(25 x 20 mL sachets)

HI 70032P

1382 ppm (mg/L) calibration kit
(25 x 20 mL sachets)

HI 70038P

6.44 ppt (g/L) calibration kit
(25 x 20 mL sachets)

HI 70039P

5000 µS/cm calibration kit
(25 x 20 mL sachets)

HI 70442P

1500 ppm calibration kit
(25 x 20 mL sachets)

HI 73301

Spare electrode for DiST1

HI 73302

Spare electrode for DiST2

HI 73303

Spare electrode for DiST3

HI 73304

Spare electrode for DiST4

HI 731326

Calibration screwdriver (20 pcs)