Redpitaya RED PITAYA, OPEN SOURCE LAB RED Pitaya V 1.1 Data Sheet
Product codes
RED Pitaya V 1.1
Red Pitaya Hardware Specifications V1.1.1
Product name: Red Pitaya, model V1.1
● RF inputs
○ Number of channels: 2
○ Bandwidth: 50 MHz (3 dB)
○ Sample rate: 125 Msps
○ ADC resolution 14 bits
○ Input coupling: DC
○ Input noise level: < 119 dBm /Hz (D)
○ Input impedance: 1 MΩ // 10 pF (A,B)
○ Full scale voltage: 2Vpp, (46 Vpp for lowgain jumper setting) (T,V)
○ DC offset error: <5 % FS (G)
○ gain error: < 3% (at high gain jumper setting), <10% (at low gain jumper setting)
○ Bandwidth: 50 MHz (3 dB)
○ Sample rate: 125 Msps
○ ADC resolution 14 bits
○ Input coupling: DC
○ Input noise level: < 119 dBm /Hz (D)
○ Input impedance: 1 MΩ // 10 pF (A,B)
○ Full scale voltage: 2Vpp, (46 Vpp for lowgain jumper setting) (T,V)
○ DC offset error: <5 % FS (G)
○ gain error: < 3% (at high gain jumper setting), <10% (at low gain jumper setting)
(G)
○ Absolute maximum input voltage rating: 30 V (S) (1500 V ESD)
○ Overload protection: protection diodes (under the input voltage rating conditions)
○ Input channel isolation: typical performance 65 dB @ 10 kHz, 50 dB @ 100 kHz,
○ Overload protection: protection diodes (under the input voltage rating conditions)
○ Input channel isolation: typical performance 65 dB @ 10 kHz, 50 dB @ 100 kHz,
55 dB @ 1 M, 55 dB @ 10 MHz, 52 dB @ 20 MHz, 48 dB @ 30 MHz, 44 dB @ 40
MHz, 40 dB @ 50 MHz. (C)
MHz, 40 dB @ 50 MHz. (C)
○ Harmonics
■ at 3 dBFS: typical performance <45 dBc (E)
■ at 20 dBFS: typical performance <60 dBc (E)
■ at 20 dBFS: typical performance <60 dBc (E)
○ Spurious frequency components: Typically <90 dBFS (F)
○ Connector type: SMA (U)
○ Frequency response is adjusted by digital compensation
○ Connector type: SMA (U)
○ Frequency response is adjusted by digital compensation
● RF outputs
○ Number of channels: 2
○ Bandwidth: 50 MHz (3 dB) (K)
○ Sample rate: 125 Msps
○ DAC resolution: 14 bits
○ Bandwidth: 50 MHz (3 dB) (K)
○ Sample rate: 125 Msps
○ DAC resolution: 14 bits