Fluke Fluke 4326962 Data Sheet

Increase the safety and speed of electri-
cal thermal imaging inspections with the new 
Fluke ClirVu

®

 IR Windows. Reduce the risk of 

arc-flash and electrocution, increase the safety 
of your personnel and reduce the time and 
cost of preventive maintenance.
• No more removing the panel door for

installation

• Work permit requirements and NFPA 70E

processes are significantly reduced

• Full PPE is often not required so inspections

are done faster and more comfortable

  Superior arc blast protection:

– High temperature silicon gaskets
– Mounting and door latches provide high pressure 

gasket compression

– Die cast components are manufactured with the 

highest strength alloys

– Jam nut screws are made from 4037 steel, heat 

treated to 160,000 psi tensile

  Torture Tested to the highest test ratings

– IEEE C37.20.7 63 kA Arc tested at KEMA,  UL 

50/50E/50V, UL1558, IEC60529-1: IP67, IEC 

60068, NEMA 4/12, CSA C22.2 NO. 14-13:2012, 

and CE

  Quick and easy installation 

– Installation takes 5 minutes with one technician
– Only one hole necessary with standard Greenlee

®

 

punch. Rear access required for punch connection 

only (Easily accomplished with one technician)

– Installs from front; no template needed; no rear 

access required

– Grounds instantly to metal enclosure with patent 

pending AutoGround

™

 process

– Sharp teeth on jam nuts assure four gas-tight 

ground connections

– All components have electrically conductive 

finishes for optimum grounding

  Quarter turn latch easily opens hinged cover

  Corrosion and UV resistance for challenging outdoor 

environments

  Three sizes 50 mm, 75 mm and 95 mm (2 in , 3 in 

and 4 in) with the option of hand turn or security 

key door latches