Trapeze Networks MP-620 lightning protection kit for outdoor antenna ANT-LGTNG-A Data Sheet

3

•  Supports up to 500 simultaneous clients
•  Direct Data Path Forwarding enables local switching of data traffi c in the 

Mobility Point or forwarding of data to Mobility Point

•  Dedicated hardware based encryption support
•  Dual attached power-over-ethernet (PoE) with redundant network link
•  RingMaster based outage resiliency planning for RF Auto-Tune

•  MP confi gured for simultaneous direct data path distributed switching, or 

centralized switching depending on the needs of the application

•  Optimizes traffi c fl ow for radically reduced latency and massive scalability
•  Optimizes network capacity, performance and utilization
•  Optimizes MX traffi c loading, capacity, performance and utilization
•  Management, control and confi guration retained in MX

•  Zero confi guration installation with no pre-staging
•  One-snap invisible ceiling grid attachment
•  Mobility Point confi gured by MX
•  True omni-directional antenna allows position independent placement

•  Equalize client sessions across groups of MPs with like Service Policies
•  Restore equality of session load across groups of MPs with like service 

profi les when new MPs are added or an MP returns from transient outage

•  Equalize balanced group of MPs across multiple MXs in a Mobility Domain
•  Client steering across 802.11a/b/g bands to maximize usage and 

consistently balance load over the available spectrum

•  7.8 in (19.81 cm) x 7.8 in (19.81 cm) x 2.76 in (7.0 cm)

•  3.53 lbs (1.6 kg)

•  10/100 Fast Ethernet port for unshielded twisted pair (UTP) connectivity on 

ruggedized 8-pin DIN connector with power-over-ethernet (PoE) provided by 
supplied POE injector, and supplied 50-meter 8-pin DIN to RJ-45 cable

•  Two External N-type female connectors for external 802.11a (5GHz) and 

802.11b/g (2.4 GHz) antennas (ordered seperately)

•  Operating temperature:  -30

0

C to 55

0

C

•  Storage temperature:  -30

0

C to 55

0

C

•  Humidity:  15% - 95% (non-condensing)

•  -48 VDC, 1.2 Arms, 30 watts peak during dual-radio operation
•  Extenal auto-sensing POE injector (NOT 802.3af compliant) 
•  Input: 100-240 VAC, 1.5 Arms Output: 48 VDC, 1.2 Arms

•  Power ON/OFF provided on external power injector