Transmode TS-1100 (9013) 9013 Data Sheet
Product codes
9013
The TS-1100 (9013) chassis is a 6 RU high 19” standard based chassis with room for up to 12 Transmode plug-in units, one
Node Management Board and two Power Supply Units. It consists of a body with an electrical backplane and two mounting
brackets. The mounting brackets are adjustable to a preferred position, giving the chassis the desired mounting depth.
The two power supplies are mounted below the main
Node Management Board and two Power Supply Units. It consists of a body with an electrical backplane and two mounting
brackets. The mounting brackets are adjustable to a preferred position, giving the chassis the desired mounting depth.
The two power supplies are mounted below the main
Chassis
TS-Series chassis
MultiRate
Transponder
7700
TS-1100
Chassis
9013
TS-100
Chassis
9002
TS-1100
The TS-series system platform contains plug-in units (PIU) based on
DWDM, CWDM and SDH/SONET technology. All plug-in units are
completely ESD protected within metal housings which means that PIU´s
can be easily handled without fear of damage to the unit. These plug-in
units can be mounted in any of the two chassis TS-1100 and TS-100.
DWDM, CWDM and SDH/SONET technology. All plug-in units are
completely ESD protected within metal housings which means that PIU´s
can be easily handled without fear of damage to the unit. These plug-in
units can be mounted in any of the two chassis TS-1100 and TS-100.
TS-1100:
This chassis is intended for the larger CO installations.
TS-100:
This chassis is intended for customers that need a
compact installation, for CO or CPE applications.
compact installation, for CO or CPE applications.
It is fully possible to equip the chassis with any mix of DWDM, CWDM or
SDH/SONET plug-in units.
SDH/SONET plug-in units.
TS-100
The TS-100 (9002) chassis is a 1 RU high 19” standard based chassis with room for 2 Transmode plug-in units. One of the
two slots can be used for the Node Management Board. A management unit is required to enable management of the
node.
two slots can be used for the Node Management Board. A management unit is required to enable management of the
node.
The 1 RU high passive plug-in unit holder (9320) can hold two
TS-Series passive plug-in units and has built in fibre
management. It is intended for use with passive optical PIU´s
such as the CWDM and/or DWDM Mux/Demuxes.
TS-Series passive plug-in units and has built in fibre
management. It is intended for use with passive optical PIU´s
such as the CWDM and/or DWDM Mux/Demuxes.
Passive plug-in unit holder
Data Sheet
TS-Series
TS-Series is a
versatile platform
with modularity
both in channel
count and
transmission reach.
It is scalable up to
16 CWDM channels
and 38 C/DWDM
channels by
adding one or
several channels at
a time without any
service downtime
or impact on
existing traffic.
The protocol
transparent nature
of TS-Series provides
support for a wide
range of services
including Gigabit
including Gigabit
Ethernet, Fast
Ethernet,
SDH/SONET, Fibre
Channel, FICON,
ESCON, ETR etc.
The protocols can
be mixed between
C/DWDM and even
C/DWDM and even
between TDM
channels.
4G FC
Transponder
7400
TS-series PIU´s
TS-100 2 slot Chassis
with front cover
The fibre management unit (9310) improves the fibre
management possibilities for the TS-Series chassis.
management possibilities for the TS-Series chassis.
Fibre Management Unit
Fibre Management Unit
Passive PIU holder
TS-1100 12 slot Chassis
The two power supplies are mounted below the main
compartment of the chassis. TS-1100 is available in both AC and
DC versions. It is also possible to mix one AC and one DC power
supply in the same chassis.
compartment of the chassis. TS-1100 is available in both AC and
DC versions. It is also possible to mix one AC and one DC power
supply in the same chassis.
The power supply unit contains fans. If one power supply is not
working properly, its fans are powered from the other power
supply to ensure that the active units are adequately cooled.
Slots 1-12 in the compartment are used for plug-in Units and Slot
13 is dedicated for the Node Management Board.
working properly, its fans are powered from the other power
supply to ensure that the active units are adequately cooled.
Slots 1-12 in the compartment are used for plug-in Units and Slot
13 is dedicated for the Node Management Board.
It is possible to stack up to three TS-100 chassis, enabling one
Node Management Board to manage up to five slots. The TS-100
has built in redundant fans and the chassis is available in both DC
and AC versions. TS-100 supports all TS-Series plug-in units.
Node Management Board to manage up to five slots. The TS-100
has built in redundant fans and the chassis is available in both DC
and AC versions. TS-100 supports all TS-Series plug-in units.
The combined front cover / fibre management tray helps the
user to organize fibres and power cables.
user to organize fibres and power cables.