EXSYS EIDE DMA133 + S-ATA RAID 0/1 Combo Controller EX-3327 Leaflet
Product codes
EX-3327
E
ID
E
/
D
V
D
+
C
D
-R
O
M
EX-3327
EIDE DMA133 + S-ATA RAID 0/1 Combo Controller
Beschreibung :
Der EX-3327 ist ein EIDE und S-ATA Controller mit der PCI
und PCI-X-Bus Technologie für alle P-ATA und S-ATA Festplatten Laufwer-
ke. Mit dem eigenen BIOS kann auch vom Controller gebootet werden und es kann RAID 0 (Stripping / Geschwindigkeit) und RAID 1
(Mirroring / Datensicherheit) eingestellt werden.
(Mirroring / Datensicherheit) eingestellt werden.
Merkmale :
32-Bit PCI Enhanced IDE + S-ATA Combo Controller für zwei P-ATA und S-ATA Festplatten
Gleichzeitig mit den IDE Ports vom Motherboard einsetzbar
Kompatible zu alten UDMA 33, 66 und 100 Festplatten
Unterstützt Festplatten über 128GB
Unterstützt 80 Pin IDE/ATA 133 Kabel
Unterstützt Motherboard mit 5V PCI-Slot oder 3.3V PCI-X Slot
Kann auch als LowProfile Controller eingesetzt werden
Bemerkung ! Nur für Festplatten. Nicht für CD-ROM, DVD usw. einsetzbar
Gleichzeitig mit den IDE Ports vom Motherboard einsetzbar
Kompatible zu alten UDMA 33, 66 und 100 Festplatten
Unterstützt Festplatten über 128GB
Unterstützt 80 Pin IDE/ATA 133 Kabel
Unterstützt Motherboard mit 5V PCI-Slot oder 3.3V PCI-X Slot
Kann auch als LowProfile Controller eingesetzt werden
Bemerkung ! Nur für Festplatten. Nicht für CD-ROM, DVD usw. einsetzbar
Chip-Set :
VIA 6421A
Datentransfer-Rate :
P-ATA bis 133MB/Sek., S-ATA bis 150MB/Sek.
Anschlüsse :
1 x Interner 40 Pin High Density DMA 133 IDE Ports für zwei 2HDD, 2 x 7 Pin Serial-ATA
Hardwaresysteme :
PCI-Bus 32-Bit oder PCI-X 64-Bit Bus
Abmessung / Gewicht :
127 x 67 mm / 300g
Lieferumfang :
EX-3327, 1 x 40 Pin High Density EIDE Datenkabel, 2 x 7 Pin S-ATA Kabel, Treiber CD, Handbuch
Arbeitstemperatur :
Luftfeuchtigkeit :
Luftfeuchtigkeit :
0 bis 55
0
C
5 bis 95%
EIDE DMA133 + S-ATA RAID 0/1 Combo Controller
Description:
The EX-3327 is the most powerful IDE controller to accommodate hard disk drives with the technology of PCI and PCI-X Bus. With the
own BIOS the controller can boot and setting the RAID 0 (Stripping / Speed) and RAID 1 (Mirroring / Safety).
own BIOS the controller can boot and setting the RAID 0 (Stripping / Speed) and RAID 1 (Mirroring / Safety).
Feature :
32-Bit PCI Enhanced IDE + S-ATA Combo Controller for two P-ATA and S-ATA hard disk
Co-resides with Motherboard IDE device
Compatible to old UDMA 33, 66 und 100 hard disk
Support hard disk over 128GB
Support 80 Pin IDE/ATA 133 cable
Support Motherboard with 5V PCI-Slot or 3.3V PCI-X Slot
If possible to install the controller as a LowProfile Controller
Remark ! Only for hard disk. Not use for CD-ROM, DVD ect. Only for hard disk. Not use for CD-ROM, DVD ect.
Co-resides with Motherboard IDE device
Compatible to old UDMA 33, 66 und 100 hard disk
Support hard disk over 128GB
Support 80 Pin IDE/ATA 133 cable
Support Motherboard with 5V PCI-Slot or 3.3V PCI-X Slot
If possible to install the controller as a LowProfile Controller
Remark ! Only for hard disk. Not use for CD-ROM, DVD ect. Only for hard disk. Not use for CD-ROM, DVD ect.
Connectors :
2 x Internal 40 pin High Density DM 133 IDE port
Hardware system :
PCI-Bus 32-Bit or PCI-X 64-Bit Bus
Size / Weight :
127 x 67 mm / 300g
Packaging contents :
EX-3327, 1 x 40 Pin High Density data cable, Driver CD, Manual
Chip-Set :
Silicon Image
Data transfer rate :
P-ATA up to 133MB/Sec., S-ATA up to 150MB/Sec.
Operating Temperature :
Operating Humidity :
Operating Humidity :
0 up to 55
0
C
5 up to 95%
Anwendung/Application :
Operating System (OS):
Geprüft/Approved:
Verpackung/Packing:
RAID 0, 1 + 10
S
er
ia
l-A
T
A
Se
ria
l-A
TA
E
ID
E
E
ID
E