Tandberg Data StorageLibrary T40+, 24 slots, 1xLTO-3 8136-LTO User Manual
Product codes
8136-LTO
60
Getting Status and Information
•
SCSI ID <value as applicable>
•
Fibre Channel ID <value as applicable>
•
Fibre Topology <value as applicable>
•
Fibre Channel Speed <value as applicable>
•
SAS Address <value as applicable>
•
SAS Port Address <value as applicable>
•
Assigned Partition <1, 2, 3, or 4>
•
Control Path <Enabled, Disabled>
•
Drive Serial Number (Drive SN) <value>
•
Drive Firmware Version (Drive FW) <value>
•
World-Wide Name
•
World-Wide Node Name
The following partition and drive information is available from the Partitions Report:
•
Partition Number
•
Drive members <Drive ID>
•
Magazine members
•
Control Path <Yes or No, Drive ID>
•
Status <online/offline>
•
Total number of cartridge slots
•
Total number of cartridges
•
Barcode Mode <6 Character or 13 Character>
•
Auto Clean <Enabled or Disabled>
The path to open the report from the RMI is Reports > Partitions.
Network
The Network Report provides information on the following library settings:
•
Basic Network Settings: Address mode (static or dynamic), IP address, subnet mask, gateway,
MAC address.
MAC address.
•
Notification: SNMP server, IP address, E-mail address, Notification enabled or disabled,
Notification Severity Threshold.
Notification Severity Threshold.
•
Pass-Thru: Pass-Thru mode, slave library IP address.
The path to open the report from the FPI or from the RMI is Reports > Network.
Statistics
The Statistics Report contains the following statistics of the library:
•
Number of Fetches
•
Number of Stows
•
Power on Hours