Iomega REV™ 35GB/90GB ATAPI Drive 33031 Leaflet

35,002,122,240 

2,048

17,090,880

Track density (nominal)

88,000 tracks/inch

Linear density (max)

695,000 bits/inch

Areal density (max)

61.16 Giga-Bits/square inch

2

GMR

1

Smooth Glass disk

Embedded

18

Data recording method (coding)

48/50 Modified E

2

PRML

Unrecoverable Data Error Rate (proj)

1 error in 10

^

15 bits transferred

2,000 Insertion and Removal cycles

10,000 Insertion and Removal cycles

approx. 5 years

>30 years

1.5 kgf (3.3 lbf)

100 MB/sec

60 MB/sec

25.4 MB/sec

12.7 MB/sec

Minimum (single track)

2.5 msec (read), 3.0 msec (write)

Average

12 msec (read), 13 msec (write)

Maximum

25 msec

Latency (average rotational delay)

7.1 msec

4200 rpm

12 sec 

Stop Time (including eject)

6 sec

0 to 45 degrees C. (32 to 113 deg. F.) Ext. unit
0 to 60 degrees C. (32 to 140 deg. F.) Int. unit

-40 to 65 degrees C. (-40 to 149 degrees F.)

12 degrees C. per hour (22 degrees F. per hour)

Ambient Operating Humidity (Non-condensing)

8 to 90 % R.H

Ambient Non-Operating Humidity (Non-condensing) 5 to 95 % R.H.
Max Wet Bulb Temperature - Operating

29 degrees C. (84 degrees F.)

40.0 degrees C. (104 degrees F.)

Up to 8 KV air discharge, or 4 KV contact

© 2004 Iomega Corporation. All rights reserved. Iomega, REV and the stylized "i" logo are either registered trademarks or trademarks of Iomega Corporation in the United States and/or other countries.
GB is based on 1,000,000,000 bytes in a gigabyte. The statements contained in this document regarding development, production and distribution of the Iomega products, anticipated product
pricing and availability, expected product performance and specifications, future applications for the new products and all other statements that are not purely historical, are forward looking
statements within the meaning of the Private Securities Litigation Reform Act of 1995. All such forward looking statements are based upon information available to Iomega as of the date hereof,
and Iomega disclaims any intention or obligation to update any such forward looking statements. Actual results could differ materially from current expectations. Factors that could cause or
contribute to such differences include, but are not limited to, the successful completion of product development and testing, integration of hardware and software,market acceptance of, 
and demand for, the Iomega product, any difficulties encountered in ramping up production or other manufacturing issues, including component ava ability and pricing, co-development, 
production, and distribution issues, product pricing and conformity to specifications, dependence upon third party suppliers, software compatibility, competition, intellectual property rights 
and other risks and uncertainties identified in the reports filed from time to time by Iomega with the U.S. Securities and Exchange Commission, including Iomega’s Annual Report on 
Form 10-K for the year ended December 31, 2002, and its most recent Quarterly Report on Form 10-Q. Product in photo may vary slightly.

Distributed in the U.S. and Canada by: Iomega Corporation, 10955 Vista Sorrento Parkway, San Diego, California 92130, USA
Distributed in Latin America by: Iomega Latin America Inc., 1821 West 4000 South, Roy, Utah 84067, USA
Distributed Outside the Americas by: Iomega International SA, Geneva Business Centre 12, Avenue des Morgines, 1213 Geneva, Switzerland

*Compressed capacity assuming 2.6:1 data compression with Iomega Automatic Backup Pro software. This capacity may vary since compression is data and software dependent.
**Compared to DDS-4

RSS 03-04

60 g

(2msec half sine)

400 g (2msec half sine)

200 g (2msec half sine)

Typical cartridge drop (outside of case) up to 1.22 meters (48 inches) onto commercial grade carpet
Cartridge drop (inside of case)

up to 1.52 meters (60 inches) onto hard floor

0.4 g (zero to peak)

5 to 20 Hz

0.2 g (zero to peak)

20 to 300 Hz

Sequential reads (Internal unit)

1.0 g (zero to peak)

5 to 300 Hz

2.5 g (zero to peak)

5 to 500 Hz

1.3 g (zero to peak)

5 to 27 Hz

2.0 g (zero to peak)

27 to 60 Hz

2.5 g (zero to peak)

60 to 500 Hz

Height

10  mm

Width

77  mm

Length

75  mm

Weight

73 grams

Height

36 mm 

25.4 mm

Width

110 mm

101.4 mm

Length

156 mm

146 mm

Weight

392 grams

424 grams

5.0 V
Current Draw

Seek (Peak)

1.18 A

5.9 W

Startup (Peak)

1.15 A

5.8 W

Eject (Peak)

0.92 A

4.6 W

Continuous Writes (RMS)

0.92 A

4.6 W

Continuous Reads (RMS)

0.89 A

4.5 W

Random Read-Writes (RMS)

0.89 A

4.5 W

Idle (RMS)

0.60 A

3.0 W

The circuitry for the drive derives power from either a 5.0 V power supply or a host powered interface. Power
supply can provide 5.0 +/- .25 V D.C. and is capable of delivering up to 1.2 amp of continuous current.

-300 to 3048 meters (10,000 ft)

-300 to 12,192 meters (40,000 ft)

+-

Based on proven hard disk drive technology for maximum 
reliability and efficiency, Iomega REV products are much 
more efficient and robust than traditional tape and optical
solutions. With random access, hard drive transfer speed, and
35GB/90GB* capacities, Iomega REV drives and disks are the
best alternative for effective backup and portable storage needs.

T E C H N I C A L   S P E C I F I C A T I O N S

13

40,000

38,000

500

35/90*

20/40

20/40

4.7/NA

25

3

2

11

1,000,000

2,000

10,000

1,000