Fujitsu PRIMERGY RX100S2H P4-3G VFY:RX100S2-002EU Leaflet

Data Sheet 

⏐ Issue: 1/5/2005⏐ PRIMERGY RX100 S2 

Page 2 / 2 

All rights, including rights created by patent grant or registration of a utility model or design as well 
as rights of technical modifications are reserved. Delivery subject to availability. Designations may 
be trademarks, the use of which by third parties for their own purposes may violate the rights of the 
trademark owners. 
 
Copyright 

© Fujitsu Siemens Computers, 1/2005 

  Published by  

 
Fujitsu Siemens Computers 
http://www.fujitsu-siemens.com/ 

Company stamp 

 

 

Mono Processor Rack Server  

D1571-A10/A50 (hot-plug/easy change)

  Chip set 

Intel® E7210 

  Processors 

Intel® Celeron®  / Pentium® 4 

  Frequencies (GHz) 

2.8 / 3.0, 3.2, 3.4 

  Front-Side-Bus  

533 MHz / 800 MHz 

  Second-Level-Cache   256 Kbyte ECC / 1 Mbyte ECC 
Memory 

256 Mbyte up to max. 4 Gbyte, unbuffered ECC PC3200 DDR 
SDRAM; with Pentium® 4 organized with dual-channel in 2 
slots, with Celeron® organized with single channel in one slot 
for modules 256 Mbyte, 512 Mbyte and 1 Gbyte, mix and match 
of modules possible 
Flash-EPROM 
Local BIOS update from floppy disk;  
Remote BIOS update via LAN (Global Flash tool). 
Interfaces  
  Serial 

1 x RS-232-C, 9-pin (not available in 
combination with RemoteView via LAN) 

  Keyboard, Mouse 

2 x PS/2  

  USB 

2 x front, 1 x back  

  Graphic 

1 x VGA (15-pin) 

  LAN 

2 x RJ45 

Front panel  
on/off switch; NMI-, reset button; LED's for system status (am-
ber), identification (blue), hard disks access (green), power 
(red/green); (back: system status, identification)  
Onboard controller 
** 
  IDE 

ATA100 (for CD / DVD drives) 

   Intel® 6300ESB    
  (only for easy 
change)  
  Promise PDC20319 
  (only for hot-plug) 

LSI SATA Software RAID 0, 1  
 
SATA RAID 0, 1  
 

  LAN (Intel 82547EI  
  & Intel 82541) 

2 x Ethernet 10/100/1000 Mbit/ 

  Graphics 

ATI Rage XL 8 MB  

  Server management 

Baseboard Management Controller 
(BMC), IPMI 1.5 compatible 

Up to 2 x 80 / 160 Gbyte (SATA) 

1 Gbyte equals one billion bytes when referring to hard disk drive capacity; accessible 
capacity may vary. 

1x PCI 64-bit / 66 MHz (Standard 315 
mm long, usable for low profile cards, 
with expansion bracket included into 
system); 
1x PCI 64-bit / 66 MHz  
(low profile, 175 mm) 

Drive bays  
  for hard disks  

2x 3.5/1-inch hot-plug or 
2x 3.5/1-inch easy change  

  for accessible drives 

1x 5.25/0.5-inch for CD or DVD option 

  for floppy disk drive 

1x 3.5/0.5-inch, for FDD option 

Electrical values  
  Power supply  

Standard 

  Output power 

300 W 

  Rated voltage range 

100 - 127, 200 - 240 V  

  Rated frequency 

50-60 Hz  

  Max. rated current  

max. 4 A (100 V - 127 V)  
max. 2 A (200 V - 240 V) 

  Rated current in 
  basic configuration 

100V – 127V / 1.86A  
200V – 240V / 0.98A 

  Active power 

380 W 

  Apparent power 

381 VA 

  Heat emission 

1368 kJ/h  (1296.6 btu/h) 

 

 

Temperature/Noise/Dimension/Weight 
  Ambient temperature 

10°C - 35°C (DIN IEC 721) 

  Sound pressure L

pAm  

<= 58.9 dB (ISO9296)  

  Sound power L

WAd 

<= 7.0 Bell (ISO9296) 

  Dimensions (HxWxD) 

43 * 430 * 560 (mm) 

  Dimension  
  rack mount (HxWxD) 

575 mm rack integration depth;  
200 mm cable depth;  
1 height unit (U) 

  Rack integration kit 

inclusive sliding rails as part of the 
standard delivery 

  Weight  

approximately 12 kg  
(depends on configuration) 

  Global  

IEC 60950 

  Europe  

EN 60950 

  USA 

UL 60950 3rd. Ed. 

  Canada 

CAN/CSA-C22.2 No. 60950 3rd. Ed. 

  Europe 

EN 55 022 class A, EN 55024,  
EN61000-3-2 / -3 

  Taiwan 

CNS 13438 class A 

  Japan 

VCCI class A / JEIDA 

  Australia / New Zealand  C-Tick class A 

  USA / Canada 

FCC class A 

  Europe (CE)  

89/336/EEEC (EMC);  
72/23/EEC (LVD) 

  North America  

FCC class A  

 Product safety  
  Global 

CB 

  Europe 

CE 

  USA / Canada 

CSA

US

 / CSA

C 

There is general compliance with the safety requirements of all 
European countries and North America. National approvals 
required in order to satisfy statutory regulations or for other 
reasons, can be applied for on request. 

  Microsoft: Windows 2003 Standard; Web Edition 
  Microsoft: Windows 2000 Server 
  SCO: UnixWare 7.1.4 (RX100 S2 easy change only) 
  SUSE: LINUX ES-8; LINUX ES-9 
  Red Hat: LINUX EL2.1; LINUX EL3 
** For supported controllers (onboard and PCI cards for SCSI, 
RAID, LAN, WAN, etc.), please refer to the corresponding system 
configurator. 
Server Management (see separate data sheets) 

  Standard 

PRIMERGY ServerView Suite; PDA,  
ASR&R  

  Optional 

RemoteView, RemoteView  
Service Board (RSB)