Thecus N3200 Leaflet

Once the hardware is installed, physically connected to your network, and 
powered on, you can configure the N3200 so that it is accessible to your network 

users. Follow the steps below for initial software setup. 

The handy Thecus Setup Wizard makes configuring N3200 a snap. To configure 

the N3200 using the Setup Wizard, perform the following steps: 
 

1.  Insert the installation CD into your CD-ROM drive (the host PC must be 

connected to the network). 

 

2.  The Setup Wizard should launch automatically. If not, please browse your 

CD-ROM drive and double click on Setup.exe. 

 

 
 

 
 

For MAC OS X users, double click on Thecus Setup Wizard 1.1.6.dmg 

 
 

 

3.  The Setup Wizard will start and automatically detect all Thecus storage 

devices on your network. If none are found, please check your connection 

and refer to 

 for assistance. 

 

 

 

4.  Select the N3200 that you like to configure. Press Next to continue. 

 
 

 
 
 

 

 

 
 

14