Thecus 2.5TB N5200 BR PRO Network Storage N5200BRPRO_5050 Leaflet

 

 
 

57 

Check Update 

Click to look for updates for the selected module. 

Module File 

Location of the module file. 

Browse 

Click to browse the folder of your PC to locate the module files. 

Install 

Click to install the listed module into your N5200PRO 

 

 
 
 

From the System menu, choose the 
Factory Default item and the Reset to 

Factory Default screen appears. Press 
Apply to reset the N5200PRO to factory 

default settings. Press Cancel to go back to 
the main menu. 

 
 
 

 
 

 
 

 
 

 
 
 

 
 

From the System menu, choose the 
Firmware Upgrade item and the 

Firmware Upgrade screen appears.  
 

Follow the steps below to upgrade your 
firmware: 

 

1.  Use the Browse button to find the 

firmware file. 

 
2.  Press Apply. 

 

3.  The beeper beeps and the Busy LED 

blinks until the upgrade is complete. 

 

 
 
 

 
 

 
 

 
 

•  The beeper only beeps if it is enabled in the System Notification 

menu. 

•  Check Thecus website for the latest firmware release and release 

notes. 

Resetting to factory defaults will not erase the data stored in the hard 

disks, but WILL revert all the settings to the factory default values. 

Do NOT turn off the system during the firmware upgrade process. This 

will lead to a catastrophic result that may render the system inoperable. 

Modules can potentially harm your system. Only install modules from 

your vendor, or publishers you can trust.