Thecus 5TB Network Storage Black N5200BR_5100 Leaflet

Once the hardware is installed, physically connected to your network, and 
powered on, you can configure the N5200 so that it is accessible to your network 

users. There are two ways to set up your N5200: using the Thecus Setup 
Wizard or the LCD display. Follow the steps below for initial software setup. 

The handy Thecus Setup Wizard makes configuring N5200 a snap. To configure 
the N5200 using the Setup Wizard, perform the following steps: 
 

1.  Insert the installation CD into your CD-ROM drive (the host PC must be 

connected to the network). 

 
2.  The Setup Wizard should launch automatically. If not, please browse your 

CD-ROM drive and double click on Setup.exe. 

 

 

 

For MAC OS X users, double click on Thecus Setup 

Wizard 1.1.6.dmg 

 
 

3.  The Setup Wizard will start and automatically detect all Thecus storage 

devices on your network. If none are found, please check your connection 
and refer to 

 for assistance. 

 

 

 

4.  Select the N5200 that you like to configure. 

 

5.  Login with the administrator account and password. The default account 

and password are both “admin”.  

 

 

 
 

16