Manualsbrain.com
  1. Manuals
  2. Brands
  3. Thecus
  4. 5TB Network Storage Black
  5. Leaflet

Thecus 5TB Network Storage Black N5200BR_5100 Leaflet

Product codes
N5200BR_5100
Download
Page of 90
 
RAID Information 
Item Description 
RAID Level 
Shows the current RAID configuration. 
Status 
Indicates status of the RAID. Can read either Healthy, 
Degraded, or Damaged. 
Disks Used 
Hard disks used to form the current RAID volume. 
Total Capacity 
Total capacity of the current RAID. 
Data Capacity 
Indicates the used capacity and total capacity used by user 
data. 
USB Capacity 
Indicates the capacity allocated to USB target mode. 
168BRAID Config 
Press this to configure RAID volumes. 
Space Allocation 
Press this to adjust the space allocated for data and USB target 
mode. . 
RAID Configuration 
On the RAID List screen, press the RAID 
Config button to go to the RAID 
Configuration screen. In addition to RAID 
disk information and status, this screen lets 
you make RAID configuration settings.  
 
For more information on RAID, see 
. 
 
 
 
 
 
 
 
RAID Level 
You can set the storage volume as JBOD, RAID 0, RAID 1, RAID 5, RAID 6 or 
RAID 10. RAID configuration is usually required only when you first set up the 
device. A brief description of each RAID setting follows: 
 
RAID Levels 
Level Description 
JBOD 
The storage volume is a single HDD with no RAID support. JBOD 
requires a minimum of 1 disk. 
RAID 0 
Provides data striping but no redundancy. Improves 
performance but not data safety. RAID 0 requires a minimum of 
2 disks. 
RAID 1 
Offers disk mirroring. Provides twice the read rate of single 
disks, but same write rate. RAID 1 requires a minimum of 2 
disks. 
RAID 5 
Data striping and stripe error correction information provided. 
RAID 5 requires a minimum of 3 disks. RAID 5 can sustain one 
failed disk. 
RAID 6 
Two independent parity computations must be used in order to 
provide protection against double disk failure. Two different 
algorithms are employed to achieve this purpose. RAID 6 
requires a minimum of 4 disks. RAID 6 can sustain two failed 
disks. 
RAID 10 
RAID 10 has high reliability and high performance. RAID 10 is 
implemented as a striped array whose segments are RAID 1 
arrays. It has the fault tolerance of RAID 1 and the performance 
of RAID 0. RAID 10 requires 4 disks. RAID 10 can sustain two 
 
 
 
31