Thecus 1.5TB Server N3200 N3200_3050 Leaflet

Item Description 
RAID Level 

Shows the current RAID configuration. 

Total Capacity 

Total capacity of the current RAID. 

Status 

Indicates status of the RAID. Can read either Healthy, 

Degraded, or Damaged. 

Used Percentage 

Indicates total percentage used of the RAID volume. 

Stripe Size 

Indicates the current stripe size being used. 

Remaining Time 

Indicates the time remaining until the RAID volume is built. 

Config 

Press this to configure RAID volumes. 

On the RAID List screen, press the RAID 
Config button to go to the RAID 

Configuration screen. In addition to RAID 
disk information and status, this screen lets 
you make RAID configuration settings.  

 
For more information on RAID, see 

 

 
 

 
 

You can set the storage volume as JBOD, RAID 0, RAID 1, or RAID 5. RAID 
configuration is usually required only when you first set up the device. A brief 

description of each RAID setting follows: 
 

Level Description 
JBOD 

The storage volume is a single HDD with no RAID support. JBOD 

requires a minimum of 1 disk. 

RAID 0 

Provides data striping but no redundancy. Improves 

performance but not data safety. RAID 0 requires a minimum of 

2 disks. 

RAID 1 

Offers disk mirroring. Provides twice the read rate of single 

disks, but same write rate. RAID 1 requires a minimum of 2 
disks. 

RAID 5 

Data striping and stripe error correction information provided. 
Excellent performance and good fault tolerance. RAID 5 requires 

a minimum of 3 disks. RAID 5 can sustain one failed disk. 

If the administrator improperly removes a hard disk that should not be removed 

when RAID status is Degraded, all data will be lost. 

 

 
 

28