Thecus 1.5TB Server N3200 N3200_3050 Leaflet
Product codes
N3200_3050
87
Replacing Damaged Hard Drives
If you are using RAID 1 or RAID 5, you can easily replace a damaged hard drive
in the Thecus N3200 while keeping your data secure with the system’s automatic
in the Thecus N3200 while keeping your data secure with the system’s automatic
data recovery.
Hard Drive Damage
When a hard drive is damaged, LCM will display「RAID Damage」and system
beeps.
beeps.
Replacing a Hard Drive
To replace a hard disk drive in the N3200:
1. Remove the tray with the damaged hard disk.
2. Insert the hard disk tray then slide into the N3200 until it snaps into place.
2. Insert the hard disk tray then slide into the N3200 until it snaps into place.
3. The LED solid green when the HDD is accessed.
RAID Auto-Rebuild
When using RAID 1 or RAID 5 on the N3200, you can use the auto-rebuild
function when an error is detected.
function when an error is detected.
1. When a hard disk fails the system beeps and/or an email notification is
sent to specified receivers.
2. Check the log message to see which disk has failed.
3. Follow the steps mentioned above to replace the failed hard disk.
4. The system automatically recognizes the new hard disk and starts the
auto-rebuild sequence to resume its status before the hard disk crash.