Gigaset SL56 HANDGIGASL56 User Manual

Gigaset SL560 / GBR PTT / A31008-M1710-L111-2-7619 / starting.fm / 12.6.07

¤

Align the notches on the side of the 

battery pack with the lugs on the inside 

of the casing.

¤

Then close the cover so that it clicks 

into place.

There are notches for attaching the belt 

clip on the side of the handset at approxi-

mately the same height as the display.

¤

Press the belt clip onto the back of the 

handset so that the lugs on the belt clip 

click into the notches.

¤

Remove the belt clip if the phone is 

mounted.

¤

Pick the device up with the keypad 

facing the palm of your hand.

¤

Insert your forefinger into the notches 

on the lower edge. 

¤

Gently lift the cover up out of the not-

ches.

¤

Plug the charging cradle mains adapter 

into a mains power socket.

¤

Place the handset in the charger with 

the display facing forward.

The handset is already registered with the 

base station at the factory. 

 appears in 

the display. You do not have to re-register. 

If, however, you have to register your 

handset with the base station, please see 

Leave the handset in the charging cradle 

to charge the battery pack. 

For questions and problems see page 50.

You can change the name of the handset 

– If the handset has switched itself off 

because the battery pack is flat and is then 

placed in the charging cradle, it will switch 

itself on automatically.

– The handset must only be placed in the 

designated charging cradle.