Thecus 1TB 1-bay NAS N199_1100 Leaflet

Make the following connections on the Thecus N199 and then power up the unit: 
 

1.  Connect an Ethernet cable from your network to the WAN port on the 

back panel of the N199. 

 

2.  Connect the provided power cord into the universal power socket on the 

back panel. Plug the other end of the cord into a surge protected socket. 

 

3.  Press the power button on the front panel to power on the N199. 

 

4.  Make sure system is running properly by checking all front panel LEDs for 

any error indications. 

 

 

The handy Thecus Setup Wizard makes configuring N199 a snap. To configure the 
N199 using the Setup Wizard, perform the following steps: 
 

1.  Insert the installation CD into your CD-ROM drive (the host PC must be 

connected to the network). 

 
2.  The Setup Wizard should launch automatically. If not, please browse your 

CD-ROM drive and double click on Setup.exe. 

 

 Click 

START to continue. 

 
 

For MAC OS X users, double click on Thecus Setup Wizard 1.1.6.dmg 

 
 

 

3.  The Setup Wizard will start and automatically detect all Thecus storage 

devices on your network. If none are found, please check your connection 
and refer to 

 for assistance. 

 

 

 
 

13