Nokia E90 25544 User Manual

Product codes

25544

Select

WLAN security settings

and from the following:

•

WEP key in use

— Select the desired WEP key.

•

Authentication type

— Select

Open

Shared

•

WEP key settings

— Edit the settings for the WEP key.

WEP key settings

In the access point settings, select

WLAN security mode

WEP

Select

WLAN security settings

WEP key settings

and from the following:

•

WEP encryption

— Select the desired WEP encryption key length.

•

WEP key format

— Select whether you want to enter the WEP key data in

ASCII

Hexadecimal

format.

•

WEP key

— Enter the WEP key data.

802.1x security settings

In the access point settings, select

WLAN security mode

802.1x

authenticates and authorizes devices to access a wireless network, and prevents access if the authorization process fails.

Select

WLAN security settings

and from the following:

•

WPA/WPA2

— Select

EAP

(Extensible Authentication Protocol) or

Pre-shared key

(a secret key used for device identification).

•

EAP plug-in settings

— If you selected

WPA/WPA2

EAP

, select which EAP plug-ins defined in your device to use with the

access point.

•

Pre-shared key

— If you selected

WPA/WPA2

Pre-shared key

, enter the shared private key that identifies your device to

the WLAN to which you connect.

The settings available for editing may vary.

WPA security settings

In the access point settings, select

WLAN security mode

WPA/WPA2

Select

WLAN security settings

and from the following:

•

WPA/WPA2

— Select

EAP

(Extensible Authentication Protocol) or

Pre-shared key

(a secret key used for device identification).

•

EAP plug-in settings

— If you select

WPA/WPA2

EAP

, select which EAP plug-ins defined in your device to use with the access

point.

•

Pre-shared key

— If you select

WPA/WPA2

Pre-shared key

, enter the shared private key that identifies your device to the

WLAN to which you connect.

•

WPA2 only mode

— To enable TKIP encryption, based on transient keys changed often enough to prevent misuse, select

Off

. All devices in the WLAN must either allow or prevent the use of TKIP encryption.

The settings available for editing may vary.

EAP

Select >

Tools

Settings

Connection

Access points

The EAP (extensible authentication protocol) plug-ins are used in wireless networks to authenticate wireless devices and

authentication servers, and the different EAP plug-ins make possible the use of various EAP methods (network service).
You can view the EAP plug-ins currently installed in your device (network service).
1. To define the EAP plug-in settings, select

Options

New access point

and define an access point that uses WLAN as a data

bearer.

2. Select

802.1x

WPA/WPA2

as the security mode.

3. Select

WLAN security settings

WPA/WPA2

EAP

EAP plug-in settings

To use an EAP plug-in when you connect to a WLAN using the access point, select the desired plug-in and

Options

Enable

The EAP plug-ins enabled for use with this access point have a check mark next to them. To not use a plug-in, select

Options

Disable

To edit the EAP plug-in settings, select

Options

Edit

To change the priority of the EAP plug-in settings, select

Options

Raise priority

to attempt to use the plug-in before other

plug-ins when connecting to the network with the access point, or

Options

Lower priority

to use this plug-in for network

authentication after attempting to use other plug-ins.
See the device help for more information on EAP plugins.

Data call settings

Select >

Tools

Settings

Connection

Data call

S e t t i n g s