Transition Networks Media Conversion 100BASE-TX to 100BASE-FX E-100BTX-FX-05 User Manual

Product codes
E-100BTX-FX-05
Page of 3
Transition Networks, Inc.
6475 City West Parkway
Minneapolis, MN  55344 USA
tel 952.941.7600 or 800.526.9267
fax 952.941.2322
info@transition.com
http://www.transition.com
©2005 Transition Networks, Inc.
All trademarks are the property of their respective owners.
Technical information is subject to change without notice.
Stand-Alone Media Converters
Features
so there is no need
for a failure-prone internal fan
—far below the Class II rating of 92 bit times
see next pages
see next pages
see next pages
see next pages
next pages
see next pages
The converters will automatically re-establish
link when connected to two 10/100 auto-
negotiating switches if link is lost. With other
manufacturers’ converters the user must
intervene to re-establish link.
Convert 100BASE-TX to 100BASE-FX
Ordering Info
Specifications
Standards
IEEE Std. 802.3™ 100BASE-FX,
100BASE-TX
Fiber Optic Connector Specs
E-100BTX-FX-05;
E-100BTX-FX-05(SC);
E-100BTX-FX-05(LC)
Min TX PWR: -19.0 dBm
Max TX PWR: -14.0 dBm
RX Sensitivity: -30.0 dBm
Max In PWR: -14.0 dBm
Link Budget: 11.0 dB
E-100BTX-FX-05(MT)
Min TX PWR: -19.0 dBm
Max TX PWR: -14.0 dBm
RX Sensitivity: -33.5 dBm
Max In PWR: -14.0 dBm
Link Budget: 14.5 dB
E-100BTX-FX-05(SM)
Min TX PWR: -15.0 dBm
Max TX PWR: -8.0 dBm
RX Sensitivity: -31.0 dBm
Max In PWR: -8.0 dBm
Link Budget: 16.0 dB
E-100BTX-FX-05
(SMLC)
Min TX PWR: -15.2 dBm
Max TX PWR: -8.0 dBm
RX Sensitivity: -32.5 dBm
Max In PWR: -3.0 dBm
Link Budget: 17.3 dB
E-100BTX-FX-05(LH)
Min TX PWR: -8.0 dBm
Max TX PWR: -2.0 dBm
RX Sensitivity: -34.0 dBm
Max In PWR: -7.0 dBm
Link Budget: 26.0 dB
E-100BTX-FX-05(XL);
E-100BTX-FX-05(LW)
Min TX PWR: -5.0 dBm
Max TX PWR: 0.0 dBm
RX Sensitivity: -34.0 dBm
Max In PWR: -7.0 dBm
Link Budget: 29.0 dB
E-100BTX-FX-
05(XLW)
Min TX PWR: 0.0 dBm
Max TX PWR: +5.0 dBm
RX Sensitivity: -36.0 dBm
Max In PWR: -3.0 dBm
Link Budget: 36.0 dB
Single Fiber Products
E-100BTX-FX-05
(100); 
E-100BTX-FX-05(101)
Min TX PWR: -13.0 dBm
Max TX PWR: -6.0 dBm
RX Sensitivity: -32.0 dBm
Max In PWR: -3.0 dBm
Link Budget: 19.0 dB
E-100BTX-FX-05
(102);
E-100BTX-FX-05(103)
Min TX PWR: -8.0 dBm
Max TX PWR: -3.0 dBm
RX Sensitivity: -33.0 dBm
Max In PWR: -3.0 dBm
Link Budget: 25.0 dB
Switches
SW1:
Auto-Negotiation On/Off
SW2: 
Pause TX On/Off
SW3: 
Link Pass Through On/Off
SW4:
Far End Fault On/Off
Jumpers
Jumper Block 1:
AutoCross™ enable
Status LEDs
Power: 
Lit for normal operation
SDF or LKF 
(Link Fiber):
Lit for fiber link
SDC or LKC 
(Link Copper):
Lit for copper link
RXF 
(Receive Fiber): 
Flashing = RX data
RXC 
(Receive Copper):
Flashing = RX data
Dimensions
Width: 3.0" [76 mm]
Depth: 4.7" [119 mm]
Height: 1.0" [25 mm]
Power
External AC/DC required: 12 VDC,
0.5 A, unregulated, standard
Environment
0 – 50°C, 5% – 95% humidity
non-condensing, 0 – 10,000 feet
altitude
Shipping Weight
2 lbs. [0.90 kg]
Safety Compliance
Wall Mount Power Supply:
UL approved and CSA certified
Regulatory
Compliance
FCC Class A, EN55024, EN55022
Class A, EN61000, CE Mark
Warranty
Lifetime
Used in pairs, this media converter
can extend distances between two
twisted pair switches or a switch
and a server up to 2 km over multi-
mode fiber or up to 120 km over
single mode fiber.
Using one media converter, a switch
with a copper port can be connected
to a switch with an existing fiber
interface.
Fast Ethernet 100BASE-TX to 100BASE-FX
E-100BTX-FX-05(xxxx)

Operates under heavy traffic loads
without excess heat,

Round trip delay of only 40 bit times

Extend Network Distance

Connect Remote Devices

Link Pass Through

Far End Fault (FEF)

Automatic Link Restoration

Pause

Auto-Negotiation

AutoCross™
Extend Network Distance
Product Number
Port One
Port Two
E-100BTX-FX-05
100BASE-TX
(RJ-45)
[100 m/328 ft.]
100BASE-FX 1300nm
multimode (ST)
[2 km/ 1.2 miles]
E-100BTX-FX-05(SC)
100BASE-TX
(RJ-45)
[100 m/328 ft.]
100BASE-FX 1300nm
multimode (SC)
[2 km/ 1.2 miles]
E-100BTX-FX-05(LC)
100BASE-TX
(RJ-45)
[100 m/328 ft.]
100BASE-FX 1300nm
multimode (LC)
[2 km/ 1.2 miles]
E-100BTX-FX-05(MT)
100BASE-TX
(RJ-45)
[100 m/328 ft.]
100BASE-FX 1300nm
multimode (MT-RJ)
[2 km/ 1.2 miles]
E-100BTX-FX-05(SM)
100BASE-TX
(RJ-45)
[100 m/328 ft.]
100BASE-FX 1310nm
single mode (SC)
[20 km/12.4 miles]
E-100BTX-FX-
05(SMLC)
100BASE-TX
(RJ-45)
[100 m/328 ft.]
100BASE-FX 1310nm
single mode (LC)
[20 km/12.4 miles]
E-100BTX-FX-05(LH)
100BASE-TX
(RJ-45)
[100 m/328 ft.]
100BASE-FX 1310nm
single mode (SC)
[40 km/24.9 miles]
E-100BTX-FX-05(XL)
100BASE-TX
(RJ-45)
[100 m/328 ft.]
100BASE-FX 1310nm
single mode (SC)
[60 km/37.3 miles]
E-100BTX-FX-05(LW)
100BASE-TX
(RJ-45)
[100 m/328 ft.]
100BASE-FX 1550nm
single mode (SC)
[80 km/49.7 miles]
E-100BTX-FX-
05(XLW)
100BASE-TX
(RJ-45)
[100 m/328 ft.]
100BASE-FX 1550nm
single mode (SC)
[120 km/74.6 miles]
Product Number
Port One
Port Two
Single Fiber Products
Note: Recommended use in pairs (see next pages)
E-100BTX-FX-
05(100)
100BASE-TX
(RJ-45)
[100 m/328 ft.]
100BASE-FX 1310nm
TX / 1550nm RX sin-
gle fiber single mode
(SC)
[20 km/12.4 miles]
E-100BTX-FX-
05(101)
100BASE-TX
(RJ-45)
[100 m/328 ft.]
100BASE-FX 1550nm
TX / 1310nm RX sin-
gle fiber single mode
(SC)
[20 km/12.4 miles]
E-100BTX-FX-
05(102)
100BASE-TX
(RJ-45)
[100 m/328 ft.]
100BASE-FX 1310nm
TX / 1550nm RX sin-
gle fiber single mode
(SC)
[40 km/ 24.9 miles]
E-100BTX-FX-
05(103)
100BASE-TX
(RJ-45)
[100 m/328 ft.]
100BASE-FX 1550nm
TX / 1310nm RX sin-
gle fiber single mode
(SC)
[40 km/ 24.9 miles]
Optional Accessories
(sold separately)
Product Number Description
SPS-1872-CC
Wide Input (18 – 72VDC) Piggy Back
Power Supply
SPS-1872-SA
Wide Input (18 – 72VDC) Stand-Alone
Power Supply
E-MCR-04
12-slot Media Converter Rack
Product Number Description
WMBD
DIN Rail Mount Bracket 5.0" [127 mm]
WMBD-FS
DIN Rail Mount Bracket (flat, small)
3.1" [79 mm]
WMBL
Wall Mount Bracket 4.0" [102 mm]
WMBV
Vertical Wall Mount Bracket 5.0" [127 mm]