Transition Networks Ethernet 10BASE-T to AUI Transceiver E-TBT-MC04 Leaflet
Product codes
E-TBT-MC04
E-TBT-MC04
Transition Networks, Inc.
6475 City West Parkway
Minneapolis, MN 55344 USA
6475 City West Parkway
Minneapolis, MN 55344 USA
tel 952.941.7600 or 800.526.9267
fax 952.941.2322
info@transition.com
http://www.transition.com
fax 952.941.2322
info@transition.com
http://www.transition.com
©2006 Transition Networks, Inc.
All trademarks are the property of their respective owners.
Technical information is subject to change without notice.
All trademarks are the property of their respective owners.
Technical information is subject to change without notice.
t r a n s c e i v e r s
Ethernet
AUI to RJ-45
Features
Provides a complete interface of the AUI to
Ethernet UTP cable.
Supports data transfer rate of 10Mbps
CSMA/CD access mechanism
Capable of driving the UTP cable segment up to
100 meters (328 ft.) without the use of a repeater
Selectable Link test and SQE test functions
AUI locking post design allows the E-TBT-MC04 to
directly attach to a host’s AUI connector
Can be used with or without an AUI cable
LED indicators for network monitoring and
diagnosing
The RJ-45 port will automatically detect and
reverse the polarity on the receive pair if needed.
Ethernet AUI to RJ-45 Transceiver
This Attachment Unit Interface (AUI) transceiver provides a method for
connecting a workstation, or any other device with an AUI port, to
twisted pair cabling in a 10BASE-T network. Devices with AUI ports
could include: servers, hubs, bridges and routers. The E-TBT-MC04
transceiver allows twisted pair, UTP or STP, to be connected to these
AUI ports.
connecting a workstation, or any other device with an AUI port, to
twisted pair cabling in a 10BASE-T network. Devices with AUI ports
could include: servers, hubs, bridges and routers. The E-TBT-MC04
transceiver allows twisted pair, UTP or STP, to be connected to these
AUI ports.
Specifications
Standards
IEEE Std. 802.3™ 10BASE-T
Status LEDs
COL: Blinks when detecting collisions
STAT: Solid Green: UTP Link
established;
Blinks Green: No UTP Link;
4-Blink Pattern: Polarity reversal
detected on UTP cable
TX: Blinks when transmitting data on
the RJ-45
RX: Blinks when receiving data on the
RJ-45
STAT: Solid Green: UTP Link
established;
Blinks Green: No UTP Link;
4-Blink Pattern: Polarity reversal
detected on UTP cable
TX: Blinks when transmitting data on
the RJ-45
RX: Blinks when receiving data on the
RJ-45
Switches
SW1: SQE Test: Up is enabled
SW2: Link Test: Up is enabled
SW3: Half or Full-Duplex: Up is for
Half, Down is for Full
SW2: Link Test: Up is enabled
SW3: Half or Full-Duplex: Up is for
Half, Down is for Full
Dimensions
Width: 3.1" [79 mm]
Depth: 0.8" [20 mm]
Height: 1.7" [43 mm]
Depth: 0.8" [20 mm]
Height: 1.7" [43 mm]
Power
No external power required
Input Voltage
10.2 to 15.75 VDC
Input Current
250mA@12VDC
Environment
0 – 50°C, 5% – 95% humidity non-
condensing, 0 – 10,000 ft. altitude
condensing, 0 – 10,000 ft. altitude
Shipping Weight
1 lb. [0.45 kg]
Compliance
FCC & CISPR Class A, CE Mark
Warranty
Lifetime
Ordering Info
E-TBT-MC04
10BASE5 (AUI) DB-15 male
[50 m/164 ft.]
[50 m/164 ft.]
to 10BASE-T (RJ-45)
[100 m/328 ft.]
NEW