TE Connectivity Butt joint 2.62 mm² 6.64 mm² Insulated Yellow 34072 1 pc(s) 34072 Data Sheet
Product codes
34072
Dimensions are shown for reference
Dimensions are in inches and
Specifications subject to change.
Technical Support Center
purposes only.
millimeters unless otherwise
1-800-522-6752
specified. Values in brackets are
www.amp.com
metric equivalents.
Standard Terminals and Splices
Catalog 82042
Revised 8-00
PLASTI-GRIP
37
Product Facts
■
Pre-insulated PLASTI-GRIP
solderless terminals and
splices
solderless terminals and
splices
■
Designed specifically to
answer the need for inex -
pensive, insulated electri-
cal terminations
answer the need for inex -
pensive, insulated electri-
cal terminations
■
Can be used in almost
every type of commercial
application
every type of commercial
application
■
Accommodate wire sizes
from 22 AWG through 2/0
AWG
from 22 AWG through 2/0
AWG
The Crimp
■
Carefully engineered appli-
cation tooling has been
developed to ensure uni-
formly high quality termi-
nations
cation tooling has been
developed to ensure uni-
formly high quality termi-
nations
■
Tool and terminal have
been designed as a team to
promote ease and speed of
application and at the same
time to provide precise
crimping pressure for every
wire size
been designed as a team to
promote ease and speed of
application and at the same
time to provide precise
crimping pressure for every
wire size
■
The wire and the terminal
barrel form a homogeneous
mass of metal, providing a
connection of maximum
conductivity, tensile
strength, and high resis-
tance to corrosion
barrel form a homogeneous
mass of metal, providing a
connection of maximum
conductivity, tensile
strength, and high resis-
tance to corrosion
■
The quality performance,
the facility of installation
and the inherent simplicity
make them ideal for many
industrial applications
the facility of installation
and the inherent simplicity
make them ideal for many
industrial applications
Table of Contents
Terminals
Ring Tongue . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 38-42
Ring Tongue 90° Bend and Rectangular Tongue. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 43
Spade Tongue . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 44
Flanged Spade Tongue . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 45
Short Spring Spade Tongue and Long Spring Spade Tongue . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 46, 47
Slotted Ring Tongue and Hook Tongue. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 48
Flag Tongue and Multiple Stud . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 49
Ring Tongue 90° Bend and Rectangular Tongue. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 43
Spade Tongue . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 44
Flanged Spade Tongue . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 45
Short Spring Spade Tongue and Long Spring Spade Tongue . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 46, 47
Slotted Ring Tongue and Hook Tongue. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 48
Flag Tongue and Multiple Stud . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 49
Splices
Butt . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 50
Parallel and Shur-Plug (.093, .156 and .180 Series) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 51
3-Way Connector and .250 Tube Cap Assembly . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 52
Parallel and Shur-Plug (.093, .156 and .180 Series) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 51
3-Way Connector and .250 Tube Cap Assembly . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 52
Basic Terminal Material. The basic terminal
is constructed of fine grade high conductivity
copper per ASTM B-152 and tin-plated per
ASTM B-545. Basic material for Spring Spade
Tongue Terminals is phosphor bronze per
ASTM B-139 or brass per ASTM B-36 and
tin-plated per ASTM B-545. AMP’s special
plating process creates durable corrosion
resistance to salt spray and most chemical
fumes.
is constructed of fine grade high conductivity
copper per ASTM B-152 and tin-plated per
ASTM B-545. Basic material for Spring Spade
Tongue Terminals is phosphor bronze per
ASTM B-139 or brass per ASTM B-36 and
tin-plated per ASTM B-545. AMP’s special
plating process creates durable corrosion
resistance to salt spray and most chemical
fumes.
Color Coding. Terminal insulation
is color-coded by wire size range to
eliminate errors during installation.
is color-coded by wire size range to
eliminate errors during installation.
Funnel Entry. Assures rapid wire
insertion during high speed production.
(Except 8 to 2/0 range.)
insertion during high speed production.
(Except 8 to 2/0 range.)
Serrations. Serrations inside
barrel provide maximum contact
and tensile strength after crimping.
Dimples on 8 to 2/0 range.
barrel provide maximum contact
and tensile strength after crimping.
Dimples on 8 to 2/0 range.
Insulation. Vinyl insulation sleeve
provides good dielectric strength and
supports the wire insulation so that
no bare wire is exposed.
provides good dielectric strength and
supports the wire insulation so that
no bare wire is exposed.
Temperature Rating: 90°C Max.
AMP PLASTI-GRIP Terminals and Splices (Use PLASTI-GRIP or PIDG Tooling)
AMP
Wire
Listed
LR 7189
8 thru 4/0
Range
Certified
600V
Except as noted with individual part number listing.
22-16
Terminals, Butt & Parallel Splices
22-16 Solid or Stranded
1
600 V Max.
Recognized under
16-14
Terminals, Butt & Parallel Splices
(1000 V Fixture
the component program
16-14 Solid or Stranded
1
or Sign)
of Underwriters
12-10
Terminals, Butt & Parallel Splices
90°C Max.
Laboratories Incorporated
12-10 Solid or Stranded
1
File No. E13288
Note: 22-16 terminals and splices are stamped 22-18 in accordance with MIL-T-7928.
1
Stranded wire only using TETRA-CRIMPtooling.