LevelOne VDS-0200 (Annex A) VDS-0200 Leaflet

Product codes

VDS-0200

Ethernet over VDSL

Ethernet over VDSL2

2 Converter

Converter

one world_one brand_one level_

Digital Data Communications GmbH.

Zeche-Norm St. 25, 44319, Dortmund, Germany

All mentioned brand names are registered trademarks and property of their owners.
Technical specifications are subject to change without notice.

www.level1.com

H/W Ver.1.x

VDS-0200 (Annex A)

Why convert Ethernet to VDSL?

The LevelOne VDS-0200 converts your data from Ethernet to VDSL, making it easy

to send high-bandwidth data over long distances. This new technology uses

traditional twisted-pair telephone wiring instead of expensive Cat.5 cables.

New technology = cost-effective deployment

When using VDSL2 (Very High Speed Digital Subscriber Line) technology, users

can transmit data up to 300 meters without having to add expensive Ethernet

switches or cables to extend the network reach. And with 100Mbps downstream

and 60Mbps upstream, VDSL2technology provides ample space for all high-

bandwidth usage.

Fast transfer speeds? Yes. Easy Installation? Yes.

VDS-0200 works especially well in applications where traditional copper phone

lines are already installed: apartments, condominiums, hotels, university campus,

etc. There is no need to run expensive Ethernet cables and installers can easily

integrate VDSL technology into the existing network. The VDS-0200 is plug and

play ready and requires minimum installation time.

Customized settings

Each VDS-0200 also allows for customized settings for advanced use. Using a

built-in DIP switch, users can customize the behavior of the device to match the

desired network configuration.

Annex A

For networks that utilize PSTN telephone systems.

VDS-0200 (Annex A)

Key Features

•

Supports a VDSL connection up to 2km over single
pair copper wire

•

Provides100Mbps downstream and 60Mbps
upstream over 300m

•

Compliant with ITU-T G.993.1, G.993.2 VDSL/VDSL2 and
SG15Q4 DMT standards

•

Auto MDI/MDIX for 10/100 BaseT Ethernet LAN Ports

•

Features selectable Fast and Interleaved modes

•

Selectable fixed data rate and fixed SNR margin

•

Features 4 Dip Switches for Configuration Settings

•

Low-Latency for Video/Voice/Data applications

Technical Specification

VDSL Transmission

•  ITU-T G.993.1/2, SG15Q4 DMT Compliance
•  Trellis Code with 1024 DMT bins
•  Max Data Rate: 100/60 Mbps
•  1 * RJ-11 Port for DSL
•  1 * RJ-11 Port for Telephone

LAN Interface

• Auto-Detection for 10/100 BaseT and Half/Full

duplex

•  High performance bridge for Ethernet extension
•  Fully compatible with IEEE802.3/IEEE802.3u
•  Automatic MDIX Function
•  RJ-45 Connector x 2
•  ITU-T G.993.1/2, SG15Q4 DMT Compliance
•  Trellis Code with 1024 DMT bins

Physical Specifications

LEDs
Power, LAN1, LAN2 , DSL, M/S

Power Supply
DC 5V, 2A

Dimension
120mm (L) x 90mm (W) x 28mm (H)

Operating Temperature and Humidity
Operating: 0°C ~ 50°C
Humidity: 0% ~ 70% (non-condensing)

EMI Certifications
CE, FCC Class B