Radex RD1706 Radiation Monitor RD1706 Data Sheet
Product codes
RD1706
Precautionary measures
Do not use, place or storage the device for a long time under the
impact of intense direct solar light or height temperature, for example on an
instrument board or in a trunk. The impact of the sunlight or temperature can
lead to electrolyte leakage from power elements, their overheating or
explosion and therefore to arson, burn and other injuries. High temperature
can also cause malformation of the device's frame.
instrument board or in a trunk. The impact of the sunlight or temperature can
lead to electrolyte leakage from power elements, their overheating or
explosion and therefore to arson, burn and other injuries. High temperature
can also cause malformation of the device's frame.
Do not storage the device in damp and dusty places. It can cause
arson, electrical shock and other damages.
Protect the unit from shocks and heavy mechanical stress that can
cause damages of the device.
This device is a high-precision technology. Avoid its falling and
mechanical stress.
The device is not water-proof; it cannot be used in the environment
with a high humidity or in water. If the product wets, immediately switch off
the device and apply to «QUARTA-RAD» Ltd. If a small amount of water
has reached its surface or it was exposed to salty air it is necessary to switch
off a product, to wipe it with dry fabric, to place it in a warm dry premise and
to dry it before a complete evaporation of moisture from its internal.
the device and apply to «QUARTA-RAD» Ltd. If a small amount of water
has reached its surface or it was exposed to salty air it is necessary to switch
off a product, to wipe it with dry fabric, to place it in a warm dry premise and
to dry it before a complete evaporation of moisture from its internal.
Keep the device away from devices such as electric or magnetic
motors which generate strong magnetic fields. Do not use and place the
monitor close to areas where high electromagnetic signals are generated,
such as transmitting towers. Superhigh frequencies can lead to
malfunctioning.
monitor close to areas where high electromagnetic signals are generated,
such as transmitting towers. Superhigh frequencies can lead to
malfunctioning.
Do not attempt yourself to dismantle or fix the device.
Do not place the unit in a microwave and do not carry out any
monitoring with ionizers and ozonizers turned on.
Do not let particles penetrate through a perforated hole inside the
unit.
Do not touch electrical links of a battery block. It can cause
corrosion of links and affect normal functioning. Condensate can occur on
internal parts of
internal parts of
device in case of a rapid temperature decrease from
higher to lower level. To prevent this place the device inside a plastic bag.
Keep it there till its temperature becomes of the environment.
Keep it there till its temperature becomes of the environment.
the
5