Gw Instek PEL-3041 Electronic Load PEL-3041 Data Sheet
Product codes
PEL-3041
PEL-3000 User Manual
108
Running a Normal Sequence
Description
A load created with the Normal Sequence
function is run the same way as a normal load.
function is run the same way as a normal load.
Operation
1. Press
FUNC
> Sequence[F1] > Normal Sequence
[F1].
2. Turn normal sequence mode on by setting
N. Seq.[F1] to On.
NSEQ
will appear at the top of the display when
N. Seq. is On.
3. Turn the load on.
The normal sequence/chain starts immediately.
The
NSEQ
icon turns orange when the load is
turned on.
4. When a normal sequence/chain is running, the
screen displays which sequence, step and loop
are currently active.
are currently active.
Sequences can be paused by pressing Pause[F1]
and resumed again by pressing Continue[F1].
and resumed again by pressing Continue[F1].
If no steps have been created ―No N.Seq.‖ will
be displayed on the screen.
be displayed on the screen.
“Sequence Complete‖ will be displayed at the end
of the sequence.
of the sequence.