Gw Instek PEL-3041 Electronic Load PEL-3041 Data Sheet
Product codes
PEL-3041
PEL-3000 User Manual
92
Program
The PEL-3000 can create programs that are designed to step-
through up to 16 pre-set load operations. The program function is a
powerful tool that can allow you to perform a number of different
operations in succession.
through up to 16 pre-set load operations. The program function is a
powerful tool that can allow you to perform a number of different
operations in succession.
The execution time of each step is user-defined.
Programs can be chained together to make larger programs.
Up to 16 programs can be created for a program chain.
See page 119 for saving load operations.
Program Overview
Description
When you run a program, you are essentially
executing up to 16 different load operations
consecutively. Each of the different load
operations are ―steps‖ in the program. A
program starts at step 01 and ends at step 16.
executing up to 16 different load operations
consecutively. Each of the different load
operations are ―steps‖ in the program. A
program starts at step 01 and ends at step 16.
A program recalls the operating mode, range,
static/dynamic mode, response speed and other
settings of each step from stored memory. It also
recalls the Go-NoGo settings.
static/dynamic mode, response speed and other
settings of each step from stored memory. It also
recalls the Go-NoGo settings.
The same memory settings can be used for
multiple steps.
multiple steps.
The execution time of each step is configurable.
Applies the Go-NoGo settings for each step.
Each step must be executed in order.
Each step can be configured to automatically go
to the next step or wait for confirmation from
the user before proceeding to the next step.
to the next step or wait for confirmation from
the user before proceeding to the next step.
Individual steps can be skipped.
Programs can be linked together to make