Fluke 190-102/S 2-channel hand-held oscilloscope, ScopeMeter® 190 series II, hand-held 4025383 User Manual
Product codes
4025383
71
Chapter 5
Using Memory and PC
About this Chapter
This chapter provides a step-by-step introduction to the
general functions of the test tool that can be used in the
three main modes: Scope, Meter, or Recorder. You will
find information on computer communication at the end of
this chapter.
general functions of the test tool that can be used in the
three main modes: Scope, Meter, or Recorder. You will
find information on computer communication at the end of
this chapter.
Using the USB Ports
The test tool is provided with two USB ports:
•
•
a USB-host port to connect an external flash memory
drive (‘USB-stick’) for data storage.
drive (‘USB-stick’) for data storage.
•
a mini-USB-B port which allows you to connect the
test tool to a PC for remote control and data transfer
under PC-control, see Using FlukeView
test tool to a PC for remote control and data transfer
under PC-control, see Using FlukeView
®
on page 80.
The ports are fully isolated from the input channels and
are covered with dust covers when not in use.
are covered with dust covers when not in use.
USB stick
Mini USB
Figure 35. Test Tool USB Connections