Fluke 190-204/EU/S 4-channel hand-held oscilloscope, ScopeMeter® 190 series II, hand-held Bandwi 3894475 User Manual
Product codes
3894475
Fluke 190 Series II
Users Manual
Users Manual
6
Warning
To avoid electrical shock or fire:
• Use only the Fluke power supply, Model
• Use only the Fluke power supply, Model
BC190 (Power Adapter).
• Before use check that the selected/indicated
range on the BC190 matches the local line
power voltage and frequency.
power voltage and frequency.
• For the BC190/808 universal Power Adapter
only use line cords that comply with the local
safety regulations.
safety regulations.
Note:
To accommodate connection to various line
power sockets, the BC190/808 universal Power
Adapter is equipped with a male plug that must
be connected to a line cord appropriate for local
use. Since the adapter is isolated, the line cord
does not need to be equipped with a terminal for
connection to protective ground. Since line cords
with a protective grounding terminal are more
commonly available you might consider using
these anyhow.
power sockets, the BC190/808 universal Power
Adapter is equipped with a male plug that must
be connected to a line cord appropriate for local
use. Since the adapter is isolated, the line cord
does not need to be equipped with a terminal for
connection to protective ground. Since line cords
with a protective grounding terminal are more
commonly available you might consider using
these anyhow.
Warning
To avoid electrical shock or fire if a product
input is connected to more than 42 V peak
(30 Vrms) or 60 V dc:
• Use only insulated voltage probes, test leads
input is connected to more than 42 V peak
(30 Vrms) or 60 V dc:
• Use only insulated voltage probes, test leads
and adapters supplied with the product, or
indicated by Fluke as suitable for the Fluke
190 Series II ScopeMeter series.
indicated by Fluke as suitable for the Fluke
190 Series II ScopeMeter series.
• Before use, inspect voltage probes, test leads
and accessories for mechanical damage and
replace when damaged.
replace when damaged.
• Remove all probes, test leads and
accessories that are not in use.
• Always connect the power adapter first to the
ac outlet before connecting it to the product.
• Do not touch voltages >30 V ac rms, 42 V ac
peak, or 60 V dc.
• Do not connect the ground spring (figure 1,
item d) to voltages higher than 42 V peak
(30 Vrms) from earth ground.
(30 Vrms) from earth ground.
• Do not apply more than the rated voltage,
between the terminals or between each
terminal and earth ground.
terminal and earth ground.