Fluke 190-062 2-channel hand-held oscilloscope, ScopeMeter® 190 series II, hand-held 4025159 User Manual
Product codes
4025159
Safe Use of Li-ion battery pack
9
Safe Use of Li-ion battery pack
The battery pack Fluke model BP290 (26 Wh)/BP291
(52 Wh) has been tested in accordance with the UN
Manual of Tests and Criteria Part III Subsection 38.3
(ST/SG/AC.10/11/Rev.3) – more commonly known as the
UN T1..T8 – tests, and have been found to comply with
the stated criteria. The battery pack has been tested acc.
to EN/IEC62133. As a result they can be shipped
unrestricted internationally by any means.
(52 Wh) has been tested in accordance with the UN
Manual of Tests and Criteria Part III Subsection 38.3
(ST/SG/AC.10/11/Rev.3) – more commonly known as the
UN T1..T8 – tests, and have been found to comply with
the stated criteria. The battery pack has been tested acc.
to EN/IEC62133. As a result they can be shipped
unrestricted internationally by any means.
Recommendations to safe storage of battery pack.
• Do not store battery packs near heat or fire. Do not
store in sunlight.
• Do not remove a battery pack from its original
packaging until required for use.
• When possible, remove the battery pack from the
equipment when not in use.
• Fully charge the battery pack before storing it for an
extended period to avoid a defect.
• After extended periods of storage, it may be
necessary to charge and discharge the battery packs
several times to obtain maximum performance.
several times to obtain maximum performance.
• Keep the battery pack out of the reach of children and
animals.
• Seek medical advise if a battery or part of it has been
swallowed.
Recommendations to safe use of the battery pack.
• The battery pack needs to be charged before use.
Use only Fluke approved power adapters to charge
the battery pack. Refer to Fluke’s safety instructions
and Users Manual for proper charging instructions.
the battery pack. Refer to Fluke’s safety instructions
and Users Manual for proper charging instructions.
• Do not leave a battery on prolonged charge when not
in use.
• The battery pack gives the best performance when
operated at normal room temperature 20
°C ± 5 °C
(68
°F ± 9 °F).
• Do not put battery packs near heat or fire. Do not put
in sunlight.
• Do not subject battery packs to severe impacts such
as mechanical shock.
• Keep the battery pack clean and dry. Clean dirty
connectors with a dry, clean cloth
• Do not use any charger other than that specifically
provided for use with this equipment.
• Do not use any battery which is not designed or
recommended by Fluke for use with the Product.
• Take careful notice of correct placement of the battery
in the product or the External Battery Charger.