Hengstler mini-i CR0635532 Data Sheet

Product codes
CR0635532
Page of 7
Totalizing Counters
Components 
E N C O D E R S C O U N T E R S C O N T R O L L E R S I N D I C A T O R S R E L A Y S P R I N T E R S C U T T E R S
Miniature size
Low power consumption
Electrical connections in standard grid
Suitable for PCB mounting
Machine-solderable and washable versions available
Protection class IP 65
Totalizing Counters „mini-i“
Display
6 or 7-digit, depending on version
Digit height
4 mm, visual
Supply voltage V
   op
according to order information, tolerance     + -10 %
Power consumption
Type 634 : approx. 50 mW … 440 mW according Version           
Type 635 : 5…12 VDC 80 mW
24 VDC 160 mW
Operating temperatur
– 10 … + 50 °C
Storage temperatur
– 40 … + 85 °C
El. connection
Versions .1 and .3 with solder pins, .7 and .8 with wiring             
posts     0.6 mm, cable length <30m (only Typ 634)
Mounting
Versions .1 and .3 on PCB's, .7 with wiring posts, 
.8 with locating spring
Mounting position
horizontal
Protection class (EN 60529 ) Type .1 and .3
IP 65 Housing, IP 00 Connections
Type .7 and .8
IP 66 Front, IP 00 Connections
Type 8
IP 40 Front in Frontpanel
Vibrostability
Type 634 : 20 m/s
2
(10...500 Hz) acc. to IEC 068-2-6
Type 635 : 30 m/s
2
(10...500 Hz) acc. to IEC 068-2-6
Shock stability
Type 634 : 2000 m/s
2
acc. to IEC 068-2-27
Type 634 : 3500 m/s
2
acc. to IEC 068-2-27
General design
according EN  61010-1, EN 50178
Contamination Level
2
Protection
according to class II
Overvoltage category
II
Susceptibility to magnetic  Type 634
interference 
at 100 kA/m (PTB) no effect
Maintenancefree operatio n10 million pulses
Duty cycle at 25 °C
100 %
Weight
approx. 10 g
Pulse length min.
50 ms
Counting frequency max.
10 Hz
Reset
none 
TECHNICAL DATA
Type 634/635
Type 634: Counter with high immunity against magnetic interfere 
Type 635: Counter with high shock stability