Hengstler Tico-MFH-100-240VAC-TR-2-RS232 CR0774442 Data Sheet

Data sheet tico 772/773/774 

19/07/2012

All rights reserved

Page 1 of 7 

Display 

LCD reflective, 

 

Transflective positive: black figures on backlit background 

 

Transmissive negative: white, red or green figures on backlit 

 

ground, 2 lines, 6-digit counter readings & presets; 

 

leading zero suppression, decimal point (up to 4 decimal places)

Digit height 

1st line 9.3 mm; 2nd line 7.2 mm

Supply voltage 

SELV: 12-30 VDC; reverse polarity protected 

 

SELV: 24 VAC, 50/60 Hz ± 10% 

 

115 VAC; 230 VAC, 50/60 Hz ± 10% 

 

100-240 VAC 50/60 Hz ± 10% with switch-mode power supply

Current consumption  12-30 VDC <200 mA, 
 

12-30 VDC <250 mA with backlight 

 

24 VAC <250 mA; including sensor supply 

 

115/230 VAC <50 mA; including sensor supply 

 

90 VAC max. 80 mA; including sensor supply with switch-mode 

 

power supply

Power consumption  <5 W 
 

<8 W with switch-mode power supply

Duty cycle 

100%

Overload protection  External fuse DC: 0.16 AT (IEC 127); DC: 0.2 AT (UL 198) 
 

24 VAC: 315 mAT; 230 VAC: 32 mAT; 115 VAC: 63 mAT

Overload protection  External fuse 230 V, 2.5 mAT 
Relay outputs 

DC: 0.16 AT (IEC 127); 

 

DC: 0.2 AT (UL 198) 

 

24 VAC: 315 mAT 

 

230 VAC: 32 mAT; 115 VAC: 63 mAT

Sensor supply 

Transformer: 

 

AC operation: 12-24 VDC (load dependent), max. 50 mA 

 

Switch-mode power supply: 

 

AC operation: 24 VDC/-5%, max. 115 mA 

 

max. capacitive load = 470 µF

Data storage 

Non-volatile memory >10 years

Electrical connection  Plug-in screw-type connections/terminals
Wire cross-section 

1-1.5 mm² with wire-end sleeves

  Universally applicable as a tachometer, timer, shift counter, batch counter …
  Easy to operate
  Four different backlight colours 
 Intensity of backlighting can now be adjusted
  Large, clearly readable 48 x 48 mm display
  Input frequency up to 60 kHz
  Easy installation via plug-in terminals
  Three presets