Fujifilm FinePix A920 & SD Card 1GB 15773808+SD/1GB User Manual

110

Connecting to a PC

• FinePix A920, FinePix A900, FinePix A825, FinePix 

A820, FinePix A800 and FinePix A610 is compatible 
with PTP (Picture Transfer Protocol)/MTP (Media 
Transfer Protocol). A PTP/MTP-compatible camera is a 
camera that can recognize the PC and printer 
automatically when connected.

• Do not disconnect the USB cable (mini-B) when the 

camera is communicating with a PC. If the USB cable 
(mini-B) is disconnected during communication, the 
files on the Memory Card or internal memory may be 
damaged.

• In Mac OS X, you must set automatic setup the first time 

you connect the camera to your PC.

• When the camera and PC are exchanging data, the 

indicator lamp blinks alternately green and orange.

• Auto power off is disabled during USB connection.
• Before replacing the Memory Card, always disconnect 

the camera from the PC.

• The camera and PC may be exchanging data even 

when [Copying] disappears from your PC screen. 
Before disconnecting the USB cable (mini-B), always 
check that the indicator lamp is off.

• Always use FinePixViewer to transfer images with voice 

memos to a PC.

• The cost of an Internet provider for connecting to the 

internet is the user’s responsibility.

• When using FinePixViewer to save images on a data 

server (network), FinePixViewer may not run as it would 
in a standalone PC environment.

• Always use the FUJIFILM AC Power Adapter AC-3VX 

(sold separately). If the camera suddenly loses power 
during data exchange, the Memory Card or internal 
memory could be damaged.

• Make sure that the USB cable (mini-B) is connected 

correctly and securely.

• Connect the camera directly to the PC using the USB 

cable (mini-B). The software may not operate correctly 
when you use an extension cable, or if you connect the 
camera via a USB hub.

• When your PC has more than one USB port, the 

camera can be connected to either port.

• When Windows 98 SE is used, the supplied software 

must be installed first before connecting the camera to 
a PC using the USB cable. The PC will not recognize 
the camera if it is connected before installation.

• A memory Card, the internal memory, data in a Memory 

Card or data in the internal memory could be damaged 
if any of the following are performed;
- the USB cable is disconnected
- power switch or buttons are pressed, or the lens cover 

is interfered with