Kern EMB 1200-1Parcel scales Weight range bis 1.2 kg EMB 1200-1 User Manual

Carefully remove the balance from its packaging, remove the plastic wrapping and 
position the balance in its intended working location. 

Install the balance in such a fashion that the weighing plate is absolutely horizonta 
 

• Balance 
• Operating 

manual 

•  Batteries (2 x 1,5 V) or 1 x 9 V 

 

Remove the battery cover from the bottom of the balance. Connect 2 x 1,5V or 1

   

x

        

9V 

batteries (EMB 200-2/EMB600-2 Block-Battery 9 V). Re-insert the battery cover.  
Battery conservation through automatic power-off 3 minutes after ending a weighing 
operation. 
When the battery power is used up the display will show “LO“. Press the 

 key and 

change the batteries at once. 
When the balance is not in use for a longer period of time remove batteries and keep 
them separately. Leakage of battery liquid might damage the balance. 
 

Electric power supply is by means of the external mains supply circuit. The printed 
voltage level must comply with the local voltage.  
Only use original KERN mains supply circuits. The use of other makes is subject to 
approval by Kern.  
 

A warm-up time of 3 minutes stabilises the measured values after switching on.  

 
The accuracy of the balance depends on the local acceleration of the fall.   
Please be sure to observe the information in the chapter on adjusting. 

EMB-BA-e-1132 

9