Fluke Fluke-709H Calibrator, 4234361 Data Sheet
![Fluke](https://files.manualsbrain.com/attachments/9d57315a76f85bd9af23da46bf7ecaf7f248b87d/common/fit/150/50/7671c6748e9e70e4c5afb082a772388950496a1161e6cfdedf4b942e284b/brand_logo.png)
Product codes
4234361
Precision Loop Calibrator
The Product
9
The Selection Knob
The selection knob lets you select and control necessary
functions and navigate through the Product menus. Turn
the selection knob to highlight a menu item or adjust a
value. When the necessary selection is highlighted, push
the selection knob to do the selected action, or push and
hold to save any changes that have been made. Push
functions and navigate through the Product menus. Turn
the selection knob to highlight a menu item or adjust a
value. When the necessary selection is highlighted, push
the selection knob to do the selected action, or push and
hold to save any changes that have been made. Push
to go to the main screen with no action.
In the output modes (mA Source, mA Simulate):
•
Push the selection knob to move the display cursor
to the next digit.
to the next digit.
•
Turn the selection knob to increment or decrement
the output in steps shown by the selected decade.
the output in steps shown by the selected decade.
•
Push
, , or to set the output to preset
values.
•
Push
to select and stop these advanced modes.
Main Menu
Push to show the Main menu, choose the primary
operation mode of the Product, access the Product setup
menu, or to use HART mode. See Figure 3.
operation mode of the Product, access the Product setup
menu, or to use HART mode. See Figure 3.
gzx20.eps
Figure 3. Main Menu
The first five items shown on the Main menu change the
Product operation mode accordingly and once selected,
change the Product menu to a “home” screen for the
selected function. The operation modes are explained in
the subsequent sections of this manual.
Product operation mode accordingly and once selected,
change the Product menu to a “home” screen for the
selected function. The operation modes are explained in
the subsequent sections of this manual.
For the last two items of the Main menu, see “The
Calibrator Setup Menu” and “Hart Comm. Menu” sections.
Calibrator Setup Menu” and “Hart Comm. Menu” sections.
Note
The “HART” menu items only apply to the 709H.