Bosch AKE 35 0 600 834 001 Data Sheet
Product codes
0 600 834 001
English - 3
Kickback is the result of tool misuse and/or incorrect
operating procedures or conditions and can be
avoided by taking proper precautions as given be-
low:
operating procedures or conditions and can be
avoided by taking proper precautions as given be-
low:
■
Maintain a firm grip, with thumbs and fingers
encircling the chain saw handles, with both
hands on the saw and position your body and
arm to allow you to resist kickback forces.
Kickback forces can be controlled by the opera-
tor, if proper precautions are taken. Do not let go
of the chain saw.
encircling the chain saw handles, with both
hands on the saw and position your body and
arm to allow you to resist kickback forces.
Kickback forces can be controlled by the opera-
tor, if proper precautions are taken. Do not let go
of the chain saw.
■
Do not over reach and do not cut above shoul-
der height. This helps prevent unintended tip
contact and enables better control of the chain
saw in unexpected situations.
der height. This helps prevent unintended tip
contact and enables better control of the chain
saw in unexpected situations.
■
Only use replacement bars and chains speci-
fied by the manufacturer. Incorrect replacement
bars and chains may cause chain breakage and/
fied by the manufacturer. Incorrect replacement
bars and chains may cause chain breakage and/
or kickback.
■
Follow the manufacturer’s sharpening and
maintenance instructions for the saw chain.
Decreasing the depth gauge height can lead to in-
creased kickback.
maintenance instructions for the saw chain.
Decreasing the depth gauge height can lead to in-
creased kickback.
Additional safety warnings:
■
It is recommended that the first time user should
have practical instruction in the use of the chain-
saw and the protective equipment from an expe-
rienced operator and that the initial practice
should be cutting logs on a saw horse or cradle.
have practical instruction in the use of the chain-
saw and the protective equipment from an expe-
rienced operator and that the initial practice
should be cutting logs on a saw horse or cradle.
■
This appliance is not intended for used by per-
sons (including children) with reduced physical,
sensory or mental capabilities, or lack of experi-
ence and knowledge, unless they have been
given supervision or instruction concerning use of
the appliance by a person responsible for their
safety.
Children should be supervised to ensure that they
do not play with the appliance.
sons (including children) with reduced physical,
sensory or mental capabilities, or lack of experi-
ence and knowledge, unless they have been
given supervision or instruction concerning use of
the appliance by a person responsible for their
safety.
Children should be supervised to ensure that they
do not play with the appliance.
■
Children and juveniles, except above age 16,
under supervision and for educational pur-
poses, must not operate the chain saw, nor
should persons unfamiliar with the saw or its
handling (when borrowing). Ensure operation
manual is with the saw. Persons unfit or tired
must not operate the chain saw.
under supervision and for educational pur-
poses, must not operate the chain saw, nor
should persons unfamiliar with the saw or its
handling (when borrowing). Ensure operation
manual is with the saw. Persons unfit or tired
must not operate the chain saw.
The chain saw is intended for sawing of trees, tree
trunks, branches, wooden beams, planks, etc. Cuts
can be sawed with or across the grain. This product
is not suitable for sawing mineral materials.
trunks, branches, wooden beams, planks, etc. Cuts
can be sawed with or across the grain. This product
is not suitable for sawing mineral materials.
This manual gives instructions on the correct as-
sembly and safe use of your chain saw. It is impor-
tant that you read these instructions carefully.
sembly and safe use of your chain saw. It is impor-
tant that you read these instructions carefully.
Technical data
Chain saw
AKE 30
AKE 35
AKE 40
Part number (typ)
3 600 H34 0..
3 600 H34 0..
3 600 H34 0..
Rated power
[W]
1600
1600
1600
Chain speed (no load)
[m/s]
9
9
9
Chain bar length
[cm]
30
35
40
Nose sprocket
–
●
●
Kickback Brake
●
●
●
Chain type
3/8" - 90
3/8" - 90
3/8" - 90
Drive link thickness
[mm]
1.1 (0.043")
1.1 (0.043")
1.1 (0.043")
Amount of drive links
45
52
57
Oil reservoir capacity
[ml]
200
200
200
Automatic oiler
●
●
●
Metal gripping teeth
●
●
●
Weight without mains cable. approx. **
[kg]
3.9
4.0
4.1
Protection class
/ II
/ II
/ II
**measured with chain bar and chain
Note: Please observe the order number of your machine. The trade names of individual machines can vary.
Inrush currents cause short-time voltage drops. Under unfavourable power supply conditions, other equipment may be af-
fected. If the system impedance of the power supply is lower than 0.25 Ohm, disturbances are unlikely to occur.
fected. If the system impedance of the power supply is lower than 0.25 Ohm, disturbances are unlikely to occur.
Intended Use
Introduction
F 016 L70 721 - Buch Seite 3 Donnerstag, 11. Februar 2010 3:37 15
19 • F 016 L70 721 • 10.02