Holzmann Maschinen H020300027 Data Sheet
SAFETY
HOLZMANN MASCHINEN Austria www.holzmann-maschinen.at
Seite 19
MAGNETBOHRMASCHINE / MAGNETIC DRILL MBM 450LRE / MBM 600LRE
The machine is used for:
Drilling, threading in magnetic metal.
Any manipulation of the machine or its parts is a misuse, in this case HOLZMANN-
Drilling, threading in magnetic metal.
Any manipulation of the machine or its parts is a misuse, in this case HOLZMANN-
Machines and its sales partners cannot be made liable for ANY direct or indirect
damage.
Even when the machine is used as prescribed it is still impossible to eliminate certain residual risk
Even when the machine is used as prescribed it is still impossible to eliminate certain residual risk
factors.
W A R N I N G
Use only drills allowable for this machine!
Never use a damaged drill!
Use the machine never with defective or without mounted guard
HIGHEST RISK OF INJURY!
11.2
Incorrect use
Operation of the machine that doesn’t agree with this manual is forbidden!
Operation without the safety devices is not allowed.
You mustn’t remove the safety devices!
Incorrect is the usage for materials which aren’t mentioned in this manual.
Changes of the machine’s construction are forbidden.
11.3
General rules of security
Keep the workshop clean: It’s easy to cause accidents if the workshop is in mess.
Notice working environment: Don’t let dynamoelectric tools be damaged by wind or rain.
Don’t work in humid and darksome places. Don’t work in places with flammable gas or
liquid.
Don’t work in humid and darksome places. Don’t work in places with flammable gas or
liquid.
In case of being electrocuted: Don’t make your body touch those grounded objects such as
conduit, caliduct, fridge when using dynamoelectric tools.
conduit, caliduct, fridge when using dynamoelectric tools.
Don’t allow strangers and children to be close to the workshops:
Keep tools carefully: Unused tools should be kept in dry and high places where children’s
hands couldn’t reach to, please lock them if it’s necessary.
hands couldn’t reach to, please lock them if it’s necessary.
Don’t overload tools: Operate according to speed or load factor which has been labeled on
tools to get a better and safer effect.
tools to get a better and safer effect.
Be careful to choose tools: Don’t use small tools or accessories to finish burdensome jobs.
Proper dress: When you are working, don’t wear loose clothes and jewelries in case they
are entangled into rolling parts of tools. You’d better wear rubber gloves and antiskid
rubber overshoes when working outdoor. Workers with long hair should wear security
hats.
are entangled into rolling parts of tools. You’d better wear rubber gloves and antiskid
rubber overshoes when working outdoor. Workers with long hair should wear security
hats.
Wear eye-protecting glasses: Please wear eyes-protecting glasses when working.
Protect cables: Don’t lift dynamoelectric tools with cables and pull cables to draw
connector plugs from switches. Cables should be put away from heat and oily liquid and be
avoided to touch sharp objects.
connector plugs from switches. Cables should be put away from heat and oily liquid and be
avoided to touch sharp objects.
Fix workpiece: Please use clamps or table vices to clip workpiece before working, which is
safer than using hands; meanwhile, you can absolutely operate tools with your hands.
safer than using hands; meanwhile, you can absolutely operate tools with your hands.
Stand stably: Stand stably when you’re working. Please balance your body.
Maintain tools very carefully: Keep cleaning tools and their sharpness in order to make
them perform fully. Operators should lubricate and change accessories in time according
them perform fully. Operators should lubricate and change accessories in time according