Garrett Metallsuchgerät AT Pro International Metal Detector 99630 AT Pro International 99630 Data Sheet

Product codes
99630
Page of 53
46 Garrett Metal Detectors
at a distance of 8 to 10 cm. Note that the bottle cap's flat 
surface gives a Digital Target ID reading in the 75–85 range 
and produces the high tone of a "good" target.
  Next, switch to PRO Mode and pass the bottle cap across 
the coil again and notice the different audio. The clean sound 
heard in STD has been replaced with a mixed, chirping tone 
that has subtle low tones at the beginning and end, indicating 
a possible junk target. Pass a conductive, coin-sized target 
across the coil and note its clean high tone in comparison to 
that of the bottle cap.
  Finally, remain in PRO Mode and set IRON DISC to 35 
and switch on the Iron Audio feature. Pass the bottle cap 
completely across the coil again and note the high-tone chirp 
that is flanked by distinctive low tones on either side. Again, 
use a conductive, coin-sized target to compare its signature 
to that of a bottle cap in this PRO Mode Iron Audio setting. 
The bottle cap makes a response that is unmistakably iron.
  Final tip:  Record the results of your bench tests and refer 
to them when hunting in the field. Knowledge of the PRO 
Mode and the Iron Audio feature can reduce the amount of 
trash targets that are dug.