Sxt Scooters SXT500 EEC ELEKTROSCOOTER BLEI AKKU 78019-ESC500EEC.1 Data Sheet

How tight should the chain be ? 

• If the chain is skipping or jumping on the sprockets, this is too loose and

may be harmful.

• If the chain is making a humming sound when the wheel is turning, this is

too tight and may cause the chain to snap.

• The correct tension is achieved by adjusting the chain from its loose positi-

on to when it becomes lightly tense. 

 

 

 

 

MAINTENANCE SCHEDULE

 

Proper care of your scooter will insure optimal performance and longer life span. 

The following are a few maintenance suggestions that will keep your scooter running 

in top condition.

To tighten the chains:

Slightly loosen the two axle bolts on both sides of the 

rear wheel. (Fig.14). Then slowly adjust the two adjus-

ting screws on each side of the rear tire (Fig.15) until 

chain reaches the proper tension.

Rotate the rear wheel to make sure the chain is alig-

ned.

Finally, lock and tighten the rear axle bolts prior to 

riding.

MAINTENANCE

instructions

sxt-scooters

12