Oregon Scientific Lifestyle-Pulsuhr SE338M Strapless heart rate monitor watch Dark green, White 00063796 Data Sheet
![Oregon Scientific](https://files.manualsbrain.com/attachments/8562741505b0b3b4f81efb594242b3b5846a0bd1/common/fit/150/50/30d1d284e27482feff320e41c5203bb9750dfe436f232bdda028e18f915d/brand_logo.gif)
Product codes
00063796
EN
9
watch only allows for all data to be deleted.
To delete memory:
To delete memory:
1. Touch
MODE/- repeatedly to select “MEM”.
2. Touch
+/ST/SP repeatedly until “DELETE” will be
displayed.
3. Touch
MODE/- to confirm.
DONE indicates the record has been cleared.
MODE/-
+/ST/SP
MODE/-
When starting an exercise and memory is full, “FULL” will be
displayed, followed by “DELETE”.
• Touch
MODE/- to delete all records
OR
• Touch
ENTER
to ignore and start an exercise
without recording data for it.
OTHER OPERATiONS AND SETTiNGS
ACTiVATE BACKLiGHT
Touch
EL. (Touch EL again to extend backlight for another
5 seconds).
NOTE
The backlight function will not operate if “ ” is
displayed.
BEEP TONE ON / OFF
When time is displayed, touch
+/ST/SP to activate /
deactivate beep tone.
indicates beep tone is deactivated.
REPLACE BATTERY
If the battery power of your watch is low, the watch will
display:
.
To replace watch battery:
1. Use a coin to open the battery compartment lid by
turning it anticlockwise.
2. Remove the old battery and insert a new CR2025, 3V
lithium battery.
3. Secure the lid by turning the coin clockwise.
iMPORTANT
Remember to set the profiles after every
battery replacement or reset.
SE338_EN_EU_R3.indd 9
24/8/2011 15:47:12