Timex Ironman Run Trainer 2.0 GPS Technologie Strapless GPS heart rate monitor watch T5K744 Data Sheet

You can set the chronograph to take a lap/split automatically when you reach a certain lap distance or time. 

You can also set the chronograph to stop or resume timing automatically when you reach a certain speed.

Turn on auto split to automatically take a lap/split when you reach a certain lap distance or time.
1.  From the SETTINGS menu, open HANDS FREE.

2.   Set  AUTO SPLIT to DIST to take a lap/split based on distance, or set to TIME to take a lap/split based on lap 

time.

3.   Set the data that triggers auto split:

•   If you set AUTO SPLIT to DIST, set the DIST field to the distance at which you want to take a lap/split.

•   If you set AUTO SPLIT to TIME, set the TIME field to the time at which you want to take a lap/split.

To use auto split once it is set up, open the CHRONO, connect to the sensors, and start timing the workout. 

Every time you reach the specified distance or time, the chronograph takes a lap/split.

Turn on auto resume and auto stop, and set the threshold (the speed that activates auto resume and auto 

stop). 
1.  From the SETTINGS menu, open HANDS FREE. 
2. Toggle AUTO RESUME and AUTO STOP to ON. 
3. Select THRESHOLD. 
4.  Set the speed at which AUTO RESUME and AUTO STOP will activate.

To use auto resume and auto stop once they are set up, open the CHRONO, connect to the sensors, press 

START and begin running. When you move slower than the threshold, the chronograph stops timing. If you then 

start moving faster than the threshold, the chronograph resumes timing the workout.

noTe: If you press STOP to pause the CHRONO, you will have to press START to continue timing a workout. 

noTe: If you do not have AUTO RESUME set to ON, you will have to press START to continue timing a workout

that was paused by AUTO STOP.