Beurer PM 90 Heart rate monitor watch with chest strap Black/silver 676.10 Data Sheet
Product codes
676.10
26
Pairing the signals from the device
The digital transmitter and receiver have to be paired. If you buy
each device separately, e.g. as a replacement, or if you change the
batteries, then you have to pair the devices before use.
The devices have to be switched on for this operation. To do this put
on the chest strap, activate the Speedbox and switch on the scale by
pressing it slightly with your foot.
each device separately, e.g. as a replacement, or if you change the
batteries, then you have to pair the devices before use.
The devices have to be switched on for this operation. To do this put
on the chest strap, activate the Speedbox and switch on the scale by
pressing it slightly with your foot.
menu
Change into the
Setting
menu.
option / set
Limits
is displayed.
option / set
Units
is displayed.
option / set
LightMan
is displayed.
option / set
Pair NewDev
is displayed.
start / stop
Hr Search
is displayed. Your HR
monitor starts to search for the de-
vices. You can follow the success of
the search on the display:
vices. You can follow the success of
the search on the display:
HR-Belt
signals that the chest strap
has been successfully connected.
SPD Dev
signals that the Speedbox
has been successfully connected.
Scale
signals that the scale has
been successfully connected. If the
scale has switched itself off auto-
matically in the meantime, then
switch them on again.
scale has switched itself off auto-
matically in the meantime, then
switch them on again.