Timex Ironman Run Trainer 2.0 GPS Technologie GPS heart rate monitor watch with chest strap T5K742 Data Sheet

Make changes to settings from the Device Agent, and then download 

those settings to the device.
1.  Connect the charging clip to the watch, then plug the USB cable into 

the computer. A picture of a connected computer appears on the 

watch display. 

2.  Open the Device Agent on your computer.
3.  Select the Run Trainer

™

 2.0 from the 

Device field.

4. Click 

Settings.

5.  Change settings, then click

 Save.

When the settings transfer is complete, close the Device Agent and unplug 

the watch from the computer.

1.  Adjust the sensor strap so it fits snug to your chest, just below your 

sternum.

2.  Attach the heart rate sensor to the strap.
3.  Wet the heart rate sensor pads on the back of the strap, then put on 

the strap.

Prompt the watch to search for the heart rate sensor and begin receiving 

data. 
1.  Make sure you are at least 30 feet away from other heart rate sensors.
2.  Wear the heart rate sensor as described above. 
3.  From the SETTINGS menu, open SENSORS.
4.  Make sure that HEART RATE is set to YES.
5.  Select SEARCH, then select HEART RATE. 
The watch searches for the sensor. A message  

displays when the sensor is found and paired to  

the watch.