Analog Devices AD8000 Evaluation Board AD8000YCP-EBZ AD8000YCP-EBZ Data Sheet

 

 

 

Rev. 0 | Page 1 of 4 

The EB-O8CP33-1Z is designed to aid in the evaluation of 
single, high speed operational amplifiers. The EB-O8CP33-1Z  
is a bare board (that is, there are no components soldered to  
the board) that enables users to quickly prototype a variety of 
operational amplifier circuits, which minimizes risk and  
reduces time to market. The EB-O8CP33-1Z evaluation  
board supports any of the Analog Devices, Inc., single, high 
speed operational amplifiers in 8-pin, 3 mm × 3 mm lead frame 
chip scale packages (LFCSP) with a dedicated feedback pin. 

Figure 1 shows the component side and circuit side of the 
evaluation board. Figure 2 shows the evaluation board 
schematic. 

The 4-layer evaluation board accepts edge-mounted SMA con-
nectors on both inputs and outputs, which allows efficient and 
quick connection to test equipment or other circuitry.  

The board ground plane, component placement, and power 
supply bypassing have been optimized for maximum circuit 
flexibility and performance. The evaluation board uses a variety 
of SMT component case sizes: 0402, 0508, 0603, and 7343.  

Figure 3 and Figure 5 show the evaluation board assembly 
drawings. The metal layout pattern for connecting the board to 
the op amp and to the supporting circuitry is shown in Figure 4 
and Figure 6. 

 

08

78

0-

0

01