Medisana CardioCompact 51098 Information Guide

If  you  are  in  memory  recall  mode  (check  chapter  5.1 Displaying 
stored results

), press and hold the MEM-button  

7

  for at least 3 

seconds to delete the values stored under this memory slot. “dEL” 

will be shown and an acoustic signal will be emitted for confirmation.
Press and hold the MEM-button 

7

  together with the SNOOZE-

button 

1

 for at least 3 seconds to delete ALL values stored in the 

selected user memory. “CLr” is shown and 3 beeps will be emitted 

for confirmation.
Press Start 

6

 or MEM 

7

 to return to standby mode. 

The  MEDISANA CardioCompact Blood pressure monitor fea-
tures an intgration option for transferring your measured values 
through the mini-USB cable to the VitaDock app resp. online. 
Therefore you need the VitaDock software for your computer. 
Download the software from www.medisana.com/software as follows:
1. Go to www.medisana.com/software  
2. Select “CardioCompact” as your device  
3. Download and install the VitaDock software on your computer 
4.

 You will find a detailed instruction on the website, how to install 

    and use the software.

• The battery change symbol “         “ 

r

 appears in the display:

  The batteries are too low or empty. Replace all four batteries with
  new batteries of type AAA, 1.5V.

• Unusual measurement results or “SYS HI”, “SYS LO”, “dlA Hi”  
  or “dIA Lo” are displayed:
  Fit the cuff correctly and assume the correct position. Keep still
  during the measurement.  This blood pressure monitor is not 
  suitable for persons with a strong arrhythmia. 

51098 Travel GA West AM Master.indd   44

27.09.2012   12:29:19