Analog Devices ADP1047/ADP1048 Daughter Card Evaluation Board ADP1048-600-EVALZ ADP1048-600-EVALZ Data Sheet
Product codes
ADP1048-600-EVALZ
ADP1048 600 Watt Evaluation Kit
ADP1048-600-EVALZ
PRD 1363
Rev. 1.3
Reference designs are as supplied “as is” and without warranties of any kind, express, implied, or
statutory including, but not limited to, any implied warranty of merchantability or fitness for a
particular purpose. No license is granted by implication or otherwise under any patents or other
intellectual property by application or use of reference designs. Information furnished by Analog
Devices is believed to be accurate and reliable. However, no responsibility is assumed by Analog
Devices for its use, nor for any infringements of patents or other rights of third parties that may
result from its use. Analog Devices reserves the right to change devices or specifications at any
time without notice. Trademarks and registered trademarks are the property of their respective
owners. Reference designs are not authorized to be used in life support devices or systems.
statutory including, but not limited to, any implied warranty of merchantability or fitness for a
particular purpose. No license is granted by implication or otherwise under any patents or other
intellectual property by application or use of reference designs. Information furnished by Analog
Devices is believed to be accurate and reliable. However, no responsibility is assumed by Analog
Devices for its use, nor for any infringements of patents or other rights of third parties that may
result from its use. Analog Devices reserves the right to change devices or specifications at any
time without notice. Trademarks and registered trademarks are the property of their respective
owners. Reference designs are not authorized to be used in life support devices or systems.
One Technology Way, P.O. Box 9106, Norwood, MA 02062-9106, U.S.A.
Tel: 781.329.4700
www.analog.com
Fax: 781.461.3113
©2009 Analog Devices, Inc. All rights reserved.
FEATURES
Interleaved Boost PFC topology providing high power factor and low THD
Protection features for AC line input and high voltage output
Current balancing between two phases
High efficiency
I2C serial interface to PC
Software GUI
Programmable digital filters
Programmable response to faults
Programmable inrush control
Accurate AC power metering
Digital Calibration and trimming
Protection features for AC line input and high voltage output
Current balancing between two phases
High efficiency
I2C serial interface to PC
Software GUI
Programmable digital filters
Programmable response to faults
Programmable inrush control
Accurate AC power metering
Digital Calibration and trimming
CAUTION
This evaluation board uses high voltages whenever it is powered up. The output capacitor has high level of energy
stored and it must be discharged before the load is disconnected. Extreme caution must be taken to ensure safety for
the user. It is strongly advised to power down the evaluation board when not in use.
stored and it must be discharged before the load is disconnected. Extreme caution must be taken to ensure safety for
the user. It is strongly advised to power down the evaluation board when not in use.
ADP1048 EVALUATION BOARD OVERVIEW
This evaluation board features the ADP1048 in a switching power supply application. With the evaluation board and software,
the ADP1048 can be interfaced to any PC running Windows 2000/XP/Vista/NT via the computer's USB port. The software
allows control and monitoring of the ADP1048 internal registers. The board is set up for the ADP1048 to act as boost power
factor correction circuit with a rated load of 600W from an input voltage ranging from a 85 V
the ADP1048 can be interfaced to any PC running Windows 2000/XP/Vista/NT via the computer's USB port. The software
allows control and monitoring of the ADP1048 internal registers. The board is set up for the ADP1048 to act as boost power
factor correction circuit with a rated load of 600W from an input voltage ranging from a 85 V
RMS
to 265 V
RMS
.
EVALUATION SYSTEM CONTENTS
The evaluation system package contains the following items:
• Application note EVAL-ADP1048 (order code: ADP1048-600-EVALZ)
• ADP1048 evaluation board
The USB/I2C adapter for serial communication and software CD need to be ordered separately.
• Application note EVAL-ADP1048 (order code: ADP1048-600-EVALZ)
• ADP1048 evaluation board
The USB/I2C adapter for serial communication and software CD need to be ordered separately.