Analog Devices AD5371 Evaluation Board EVAL-AD5371EBZ EVAL-AD5371EBZ Data Sheet
Product codes
EVAL-AD5371EBZ
Evaluation Board for
AD5371
Preliminary Technical Data
EVAL-AD5371EB
Rev. Pr A
Information furnished by Analog Devices is believed to be accurate and reliable.
However, no responsibility is assumed by Analog Devices for its use, nor for any
infringements of patents or other rights of third parties that may result from its use.
Specifications subject to change without notice. No license is granted by implication
or otherwise under any patent or patent rights of Analog Devices. Trademarks and
registered trademarks are the property of their respective companies.
However, no responsibility is assumed by Analog Devices for its use, nor for any
infringements of patents or other rights of third parties that may result from its use.
Specifications subject to change without notice. No license is granted by implication
or otherwise under any patent or patent rights of Analog Devices. Trademarks and
registered trademarks are the property of their respective companies.
One Technology Way, P.O. Box 9106, Norwood, MA 02062-9106, U.S.A.
Tel: 781.329.4700
Tel: 781.329.4700
www.analog.com
Fax: 781.326.8703
© 2007 Analog Devices, Inc. All rights reserved.
FEATURES
Full-Featured Evaluation Board for the AD5371
USB Interface
PC Software for Register Programming
Various Reference Voltages Available
Stand-Alone Operation
USB Interface
PC Software for Register Programming
Various Reference Voltages Available
Stand-Alone Operation
INTRODUCTION
This Technical Note describes the operation and functionality
of the AD5371 Evaluation Board. This note should be used in
conjunction with the AD5371 data sheet. The evaluation board
allows the functionality and performance of the AD5371 to be
evaluated easily. The evaluation board can be used as a stand
alone board with control coming from an external DSP or
micro-controller or it can be connected to a PC. Software is
provided which can be used to program the registers of the
AD5371. Control of the AD5371 is achieved via a USB interface
of the AD5371 Evaluation Board. This note should be used in
conjunction with the AD5371 data sheet. The evaluation board
allows the functionality and performance of the AD5371 to be
evaluated easily. The evaluation board can be used as a stand
alone board with control coming from an external DSP or
micro-controller or it can be connected to a PC. Software is
provided which can be used to program the registers of the
AD5371. Control of the AD5371 is achieved via a USB interface
FUNCTIONAL BLOCK DIAGRAM
USB
INTERFACE
AD5371
DIN
SDO
SDO
SCLK
SYNC
LDAC
CLR
SYNC
LDAC
CLR
RESET
B
U
F
F
E
R
LK1
(USB Used)
HEADER
VOUT0
VOUT1
VOUT1
:
:
:
:
:
:
:
VOUT38
VOUT39
VOUT39
H
E
A
D
E
R
VREF0
VREF1
VREF2
VREF1
VREF2
5V
5V
EXT VREF
VREF
SELECTION
EVAL-AD5371EB
D
V
C
C
D
G
N
D
V
D
D
A
G
N
D
V
S
S
Figure 1. Functional Block Diagram