Analog Devices ADP150 Evaluation Board ADP150UJZ-REDYKIT ADP150UJZ-REDYKIT Data Sheet
Product codes
ADP150UJZ-REDYKIT
Evaluation Board User Guide
UG-289
One
Technology
Way
•
P.O.
Box
9106
•
Norwood,
MA
02062-9106,
U.S.A.
•
Tel:
781.329.4700
•
Fax:
781.461.3113
•
www.analog.com
RedyKit for the ADP150 LDO
PLEASE SEE THE LAST PAGE FOR AN IMPORTANT
WARNING AND LEGAL TERMS AND CONDITIONS.
Rev. 0 | Page 1 of 8
FEATURES
ultralow noise voltage regulator
All-voltage options included for evaluation
Surface-mount
Surface-mount
parts that can be easily soldered
Additional parts for prototyping
CONTENTS
evaluation board, V
OUT
= 3.3 V
evaluation board, V
OUT
= 1.8 V
5 additional
voltage options in a labeled bag
GENERAL DESCRIPTION
RedyKit™ allows simplified
prototyping and evaluation and is available for every standard
fixed output voltage option in the
fixed output voltage option in the
RedyKit allows the user to evaluate all voltage options with one
easy-to-order kit.
All surface-mount
easy-to-order kit.
All surface-mount
parts are sorted and stored in the kit
with the Analog Devices, Inc., part number and fixed output
voltage clearly printed on each zip-top bag (see Figure 2).
The kit can be used in the engineering lab to evaluate required
voltage options. When other voltage options need to be
evaluated, a different part from the kit can be easily soldered
onto one of the evaluation boards supplied with the kit.
voltage clearly printed on each zip-top bag (see Figure 2).
The kit can be used in the engineering lab to evaluate required
voltage options. When other voltage options need to be
evaluated, a different part from the kit can be easily soldered
onto one of the evaluation boards supplied with the kit.
TYPICAL APPLICATION CIRCUITS
1
2
3
5
4
VOUT
NC
VIN
GND
EN
OFF
ON
C
OUT
1µF
V
OUT
= 1.8V
NC = NO CONNECT. DO NOT
CONNECT TO THIS PIN.
CONNECT TO THIS PIN.
09908-
002
Figure 1.
The
comes with fixed 1.8 V and 3.3 V
evaluation boards. The kit also contains additional parts for
prototyping. The kit, which contains individually packaged parts
and the two evaluation boards, is packaged in an ESD foam pad
inside a treated cardboard box that measures 8.7" (L) × 7.9" (W)
× 1.75" (H), that is, 22 cm (L) × 20 cm (W) × 4.5 cm (H).
For additional information, also see the ADP150 evaluation
board user guide,
prototyping. The kit, which contains individually packaged parts
and the two evaluation boards, is packaged in an ESD foam pad
inside a treated cardboard box that measures 8.7" (L) × 7.9" (W)
× 1.75" (H), that is, 22 cm (L) × 20 cm (W) × 4.5 cm (H).
For additional information, also see the ADP150 evaluation
board user guide,