Atmel Evaluation Kit AT91SAM9X25-EK AT91SAM9X25-EK Data Sheet
Product codes
AT91SAM9X25-EK
Evaluation Kit Hardware
Evaluation Kit (EK) User Guide
4-15
11115A–ATARM–27-Jul-11
4.2.4.2
Boot Configuration
In order to use SAM-BA boot, the NAND Flash and SPI DataFlash must be deselected. SW1 is dedi-
cated to this purpose.
cated to this purpose.
4.2.5
Connectors
Figure 4-10. CM Board Dimensions
Table 4-7. Boot Configuration
Designation
Default Setting
Feature
SW1 (1, 4)
ON
Set to OFF disables the NAND flash
SW1 (2, 3)
ON
Set to OFF disables the SPI DataFlash