Atmel ATAVRBFLY Data Sheet
AVR Butterfly User Guide
-9
4271C–AVR–04/05
2.2.2
Entering Your Name
Using a Terminal:
Using a Terminal:
1.
Connect a serial cable from the PC to the AVR Butterfly as described in Section
3.7 “Connect to PC”, Open a terminal on your PC (e.g. HyperTerminal) and con-
figure the terminal to 19200 Baudrate, 8 Databits, none Parity and one stop bit.
3.7 “Connect to PC”, Open a terminal on your PC (e.g. HyperTerminal) and con-
figure the terminal to 19200 Baudrate, 8 Databits, none Parity and one stop bit.
2.
Go through point 1, 2 and 3 above.
3.
When the “ENTER NAME” is displayed press the joystick down (“SCROLL
DOWN”), and “DOWNLOAD NAME” will be displayed
DOWN”), and “DOWNLOAD NAME” will be displayed
4.
Press center push (“ENTER”) to activate the UART, and the text “WAITING FOR
INPUT ON RS232” will be displayed.
INPUT ON RS232” will be displayed.
5.
Type your name in the terminal window on the PC (up to 25 characters) and save
the name by pressing enter on your PC-keyboard. The name you typed should
now be displayed in the AVR Butterfly display.
the name by pressing enter on your PC-keyboard. The name you typed should
now be displayed in the AVR Butterfly display.
Note:
The Auto Power Off feature is default enabled. It will turn off the LCD after
default 30 minutes. This timeout can be changed or turned off. To wake the
AVR Butterfly from SLEEP, press the joystick in the UP-position.
default 30 minutes. This timeout can be changed or turned off. To wake the
AVR Butterfly from SLEEP, press the joystick in the UP-position.
2.3
Menu System
A menu system is established to be able to shift between the different modules in appli-
cation in a efficient way.
cation in a efficient way.