Atmel Xplained Pro Evaluation Kit ATSAM4E-XPRO ATSAM4E-XPRO Data Sheet
Product codes
ATSAM4E-XPRO
SAM4E [DATASHEET]
Atmel-11157D-ATARM-SAM4E16-SAM4E8-Datasheet_12-Jun-14
1478
52.
Revision History
In the tables that follow, the most recent version of the document appears first.
Table 52-1.
SAM4E Datasheet Rev. 11157D 12-Jun-14 Revision history
Doc. Date
Changes
12-Jun-2014
Modified Title of the document (SAM4E Series)
Changed structure of the document (order of sections: GMAC, DAC...)
Ethernet MAC (EMAC) replaced with Ethernet MAC (GMAC) and EMAC signals replaced with GMAC signals
throughout the document (example: GTXCK instead of ETXCK, etc.).
throughout the document (example: GTXCK instead of ETXCK, etc.).
Added tamper detection
Modified note 1 (removed “or using internal voltage regulator”)
Modified note 1 (removed “or using internal voltage regulator”)
: Modified information on Timer channels
(Tamper
detection added ; AFE block ; WKUP pins)
Timer Counter B and C added in
Timer Counter B and C added in
(“DATRG” instead of “DACTRG”, WKUP[15:0] added, FFPI signals
modified)
,
and
Modified notes after
and
: 2.0V replaced with
2.4V (VDDIN minimum value for FAE)
(paragraph below
)
Updated information on the ERASE pin in
Removed note 1 in
and
Removed reset values for Write-only registers
Minor formatting and editorial changes throughout
Updated 2nd instruction line, in
Updated 2nd instruction line, in
: updated ‘Constant’ field description
: updated ‘VECTCLRACTIVE’ and
‘VECTRESET’ field descriptions
: updated ‘USERSETMPEND’ field description
: updated ‘ADDRESS’ field description
: updated ‘ADDRESS’ field description
: updated ‘TICKINT’ and ‘ENABLE’ field descriptions
”: updated ‘RELOAD’ field description
: updated ‘CURRENT' field description